Advertisement
26)
26)
TIE (item 36)
TIE
This warning label is positioned on the
lower frame.
Make sure no personal are standing
Make sure no personal are standing
close to the tow rope.
close to the tow rope.
See page 4-14 for detail.
See page 4-14 for detail.
27)
27)
KEEP CLEAR-BOOM/ARM
KEEP CLEAR-BOOM/ARM (item 37)
This warning label is positioned on both
side of the arm.
Serious injury or death can result from
Serious injury or death can result from
falling of the attachment.
falling of the attachment.
To prevent serious injury or death, keep
To prevent serious injury or death, keep
clear the underneath of attachment.
clear the underneath of attachment.
28)
28)
ECM CONNECTOR (item 38)
ECM CONNECTOR
This warning label is positioned on the bat-
tery cover.
Before carrying out any electric welding
Before carrying out any electric welding
on this machine, follow the below proce-
on this machine, follow the below proce-
dure.
dure.
Pull the connector out of all electric con-
-
trol units.
-
Connector the ground lead of the weld-
ing equipment as close to the welding
point as possible.
See page 6-41 for detail.
See page 6-41 for detail.
W A R N I N G
Before carrying out any electric welding on this
machine
- Pull the connectors out of all electronic control
units.
- Connect the ground lead of the welding equipment
as close to the welding point as possible.
Read the instructions in operator's manual for
details.
0-13
4507A0FW02
14070FW31
7807AFW20
Advertisement
