Page 5
C-440 BALL RACE REMOVER Thank you for purchasing the HOZAN C-440 BALL RACE REMOVER. With proper care and handling, this fine tool will provide years of trouble-free operation. Please read this entire instruction manual carefully before attempting to place this tool in service. Please keep this instruction manual available for reference.
Page 6
The size of ball race is generally identified with inner diameter in inch. Not like other conventional remover, the C-440 holds a ball race from over, therefore in this instruction manual the applicable size of ball races are indicated by outer diameter in metric.
Page 7
Set the chuck cover loose enough not to contact the ball race and claw of the chuck. 1 1 1 1 Lay the C-440 and hold horizontally. Insert the fork into the C-440. To insert the fork deeper, turn the handle counterclockwise.(Fig 1)
Page 8
Is this tool applicable to rigid fork ? Generally, the size of ball race installed on a rigid fork is rather small for C-440 ( even with smallest collar ) and there could be a little rattle between the ball race and the chuck.
Need help?
Do you have a question about the C-440 and is the answer not in the manual?
Questions and answers