Lectric XP Lite Owner's Manual page 10

Table of Contents

Advertisement

Symbol Index
Safety Alert Symbol. This symbol is used to alert
you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid
possible serious injury or death.
Safety Alert Symbol. Read, understand, and follow
the warnings and instructions in this manual.
On-Product Warning Labels
There are warning labels on your Lectric eBike for your protection.
If a label is missing or is not legible, contact Lectric eBikes
for a replacement.
Stem label
States that recognize three classes of eBikes require a label to be
placed on the bicycle denoting the class of your Lectric eBike, the
motor's wattage rating, and the top speed of your Lectric eBike.
Your bicycle comes as a Class 2 bicycle by default and has a label
with this information posted under the carry handle, near the seat
post on the bicycle.
L E CT R I C E B I K E S.C O M | 602.715.0907
Class 2 label
10

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XP Lite and is the answer not in the manual?

Questions and answers

George M Slavin
March 7, 2025

Resetting the odometer

1 comments:
Mr. Anderson
March 7, 2025

To reset the odometer on a Lectric XP Lite, hold the plus (+) button for 5 seconds.

This answer is automatically generated

Ed McDowell
March 31, 2025

how to properly install chain guard?

1 comments:
Mr. Anderson
March 31, 2025

To properly install the chain guard on a Lectric XP Lite:

1. Remove the six screws around the perimeter of the pulley belt guard and take off the front part of the guard.
2. Use an 8 mm hex wrench to unscrew and remove the crank bolt.
3. Use a crank puller tool to remove the pulley.
4. Remove the rear part of the belt guard.
5. Place the new chain guard behind the chain stay.
6. Line up the front mounting tab with the mounting point behind the pulley and insert a 4 mm bolt.
7. Line up the rear mounting tab with the rear mounting point on the chain stay and insert another 4 mm bolt.
8. Reinstall the pulley, crank, and belt.

This process requires removing existing parts and using specific tools like a crank puller and hex wrench.

This answer is automatically generated

Ron Knepp
April 26, 2025

Serial number on XP Lite 2.0

Table of Contents

Save PDF