Table of Contents
Advertisement
Intended Use
The intended use of your Lectric eBike is to be ridden by one adult
rider (age 18 and up) at an appropriate time and place for general
transportation and/or recreational use. Any other use is prohibited
and may result in SERIOUS INJURY or DEATH.
Your bicycle is NOT INTENDED for off-road or mountain bicycle use,
or for any kind of jumping. Some of these bicycles have suspension
features, but these features are designed only to add comfort, not
off-road capabilities.
Riders should be proficient cyclists (ages 18+), riding on paved
surfaces where the tires are always on the ground, on roadways,
or dedicated bicycle-only lanes where permitted by law (not on
pedestrian-use shared lanes or sidewalks). Your bicycle should not be
used to tow another bicycle.
For trailer towing, consult this Owner's
Manual and the trailer owner's manual for towing instructions and
towing compatibility.
L E CT R I C E B I K E S.C O M | 602.715.0907
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the XP Lite and is the answer not in the manual?
Questions and answers
Resetting the odometer
To reset the odometer on a Lectric XP Lite, hold the plus (+) button for 5 seconds.
This answer is automatically generated
how to properly install chain guard?
To properly install the chain guard on a Lectric XP Lite:
1. Remove the six screws around the perimeter of the pulley belt guard and take off the front part of the guard.
2. Use an 8 mm hex wrench to unscrew and remove the crank bolt.
3. Use a crank puller tool to remove the pulley.
4. Remove the rear part of the belt guard.
5. Place the new chain guard behind the chain stay.
6. Line up the front mounting tab with the mounting point behind the pulley and insert a 4 mm bolt.
7. Line up the rear mounting tab with the rear mounting point on the chain stay and insert another 4 mm bolt.
8. Reinstall the pulley, crank, and belt.
This process requires removing existing parts and using specific tools like a crank puller and hex wrench.
This answer is automatically generated
Serial number on XP Lite 2.0