Preparing The Surfaces To Be Glued - Parkside PHPA 4 C4 Operation And Safety Notes

Stop charging
Disconnect the charger cable
Unplug the charger adapter
Battery level display
The battery status indicator
Battery status indicator
Constantly red LED
Red LED keeps flashing several times
and then powers off automatically
Constantly green LED
˜ Preparing the surfaces to be glued
Do not use flammable solvents to clean the surfaces to be glued .
The ambient temperature and the materials to be bonded may not be colder
than +5 °C and not warmer than +50 °C .
The area to be glued must be clean, dry and free of grease .
Smooth surfaces should be roughened before gluing .
Quick‑cooling materials, such as steel, should be warmed a little to facilitate
adhesion .
20 GB
from the product .
14 ] [
from the socket .
11 ] [
shows the charge level using 2 coloured LEDs .
8 ] [
Charging status
8 ] [
The battery is weak . Recharge the battery .
The battery is empty . Recharge the battery
before use .
The battery is medium to maximum
charged .