Advertisement
ABTI-GM4
* IMPORTANT WARNING
THIS PRODUCT INCLUDES INSTRUCTIONS FOR INSTALLATION WHICH MUST BE
CAREFULLY FOLLOWED. THE INSTRUCTIONS ARE WORDED
IN SUCH A MANNER TO ASSUME THAT THE INSTALLER IS CAPABLE
OF COMPLETING THESE TYPE OF ELECTRONIC INSTALLATIONS.
IF YOU ARE UNCLEAR AS TO WHAT YOU ARE INSTRUCTED TO DO OR BELIEVE
THAT YOU DO NOT UNDERSTAND THE INSTRUCTIONS SO AS TO PROPERLY
AND SAFELY COMPLETE THE INSTALLATION YOU SHOULD CONSULT A TECHNI-
CIAN WHO DOES HAVE THIS KNOWLEDGE AND UNDERSTANDING. FAILURE TO
FOLLOW THESE INSTRUCTIONS
CAREFULLY AND TO INSTALL THE INTERFACE AS DESCRIBED COULD
CAUSE HARM TO THE VEHICLE OR TO SAFETY SYSTEMS ON THE VEHICLE.
INTERFERENCE WITH CERTAIN SAFETY SYSTEMS COULD CAUSE HARM TO
PERSONS AS WELL. IF YOU HAVE ANY QUESTIONS IN THIS REGARD
PLEASE CALL THE HELP LINE OR THE METRA AT 1-800-221-0932 FOR
ASSISTANCE.
1
ABTI-GM4
INSTALLATION COMPONENTS
1) ABTI-GM4 cable (Included).
2) ABTI-GM4 power cable (Included).
3) ABTI-GM4 interface (Included).
4) Motorola IHF-1000 kit (Sold separately).
5) Installation tools, wire ties, and mounting hardware as needed.
INSTALLATION PROCEDURE
1) Disconnect the vehicle battery.
2) Remove the radio from the dashboard, and disconnect any
cables connected to the radio.
FROM CAR
FROM CAR
2
ABTI-GM4
3) Insert the 14 pin plug on the ABTI-GM4 cable into the rear of
the radio.
FROM CAR
FROM CAR
FROM CAR
FROM CAR
IHF-1000 keypad
4) Insert the 16 pin plug on the ABTI-GM4 cable into the rear of
the radio.
FROM CAR
FROM CAR
FROM CAR
FROM CAR
3
IHF-1000 keypad
White
8 pin
plug
White
8 pin
plug
Advertisement
