Subscribe to Our Youtube Channel
Related Manuals for Dual MXD26
Summary of Contents for Dual MXD26
- Page 1 MXD26 INSTALLATION/OWNER'S MANUAL AM/FM/CD Receiver with Auxiliary Input, USB Charging Port, Remote Control and Detachable Face MARINE Charge Port...
- Page 2 MXD26 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.
-
Page 3: Wiring Diagram
Right Rear Using an incorrect fuse Violet/Black (-) Gray/Black (-) could damage the radio. The Gray (+) Violet (+) MXD26 uses one 5 amp AGC fuse located in-line. Left Front Left Rear White/Black (-) Green/Black (-) White (+) Green (+) -
Page 4: Control Locations
Tune / Track Down Preset 6 The MXD26 has an easy-to-use interface that provides a rewarding experience, as well as support for your favorite tunes. Audio CD-R and CD-RW disc playback ensures compatibility with your music collection, and the RCA preamp output provides the right connections to expand your system. -
Page 5: Remote Control
MXD26 OPERATION Remote Control Display Volume Down Volume Up Audio / Menu Mute Band Power / Mode Tune / Track Down Tune / Track Up... -
Page 6: General Operation
MXD26 OPERATION General Operation Faceplate Removal Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Semi-permanent Remove trim ring and install supplied #1 x 7/32” Phillips head Faceplate Installation... - Page 7 MXD26 OPERATION General Operation Press and hold AUDIO/MENU for more than 3 seconds to Setup Menu access the setup menu, then press AUDIO/MENU to cycle through menu options. When desired option appears in the display, rotate the volume knob left/right to adjust or activate the desired function.
-
Page 8: Audio Operation
MXD26 OPERATION Audio Operation Bass Press AUDIO until BAS appears Rotate the volume knob left/right to adjust (-6 minimum / 6 maximum) Treble Press AUDIO until TRE appears Rotate the volume knob left/right to adjust (-6 minimum / 6 maximum) Balance Press AUDIO until BAL appears Rotate the volume knob left/right to adjust... -
Page 9: Cd Player Operation
MXD26 OPERATION CD Player Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Eject CD Press the EJECT button to stop and eject the CD. The unit will change to tuner mode. -
Page 10: Troubleshooting
MXD26 WARRANTY Troubleshooting Problem Cause Action Unit will not turn on Yellow wire not connected or incorrect voltage Check connections for proper voltage (no power) Red wire not connected or incorrect voltage (11~16VDC) Black wire not connected Check connection to ground... -
Page 11: Limited One Year Warranty
2. If you require service during the the original purchase. warranty period, you must carefully pack the product (preferably in the Dual Electronics Corp. agrees, at our original package) and ship it by prepaid option, during the warranty period, transportation with a copy of the original... -
Page 12: Specifications
Power Output: 5 Watts RMS x 4 channels at 4 ohms and < 1% THD+N Signal to noise ratio: 75dBA (reference: 1 watt into 4 ohms) Dual Electronics Corp. Toll Free: 1-866-382-5476 www.dualav.com ©2010 Dual Electronics Corp. All rights reserved. NSA1010-V01...
Need help?
Do you have a question about the MXD26 and is the answer not in the manual?
Questions and answers