360° Surround System - Alfa Romeo Tonale Owner's Handbook Manual

360° SURROUND SYSTEM
(where provided)
The system uses four cameras to
monitor the area around the car, located
on the front grille, under the side mirrors
and on the tailgate.
AUTOMATIC ACTIVATION
The 360° Surround system is
automatically activated and displayed on
the Alfa Connect system display in the
following cases:
switching the gear lever to R (reverse);
the system will activate the rear view and
top view screen, showing the area around
the car
with the gear lever in position D (Drive)
or N (Neutral) and obstacles in the path
of the car, the system will activate either
the front and top view screen or the rear
and top view screen, depending on which
gear is engaged
Visual warnings of obstacles detected
by the ParkAssist system will always
be provided in addition to the overhead
view.
MANUAL ACTIVATION
With the gear lever in position D , N or P
(parking) and in the absence of obstacles
in the path of the car, it is possible to
activate the 360° Surround system by
accessing the "Controls" or "App" menu in
the Alfa Connect system.
It is possible to enable the display of
guide lines superimposed on the top view
and rear view using the dynamic lines
on/off menu within the "Settings" menu
on the "Vehicle" page of the Alfa Connect
system.
The dynamic lines have the following
colours depending on the distance to
surrounding objects:
Red: 0 - 30 cm
Yellow: 30 cm - 1 m
Green: 1 m - 3 m
Once the "Surround Camera" screen is
displayed, it is possible to choose one of
the four possible views, selecting the
desired one through the respective
button on the Alfa Connect system
display:
rear view and top view
wide-view rear view and top view
wide-view front view and top view
front view and top view.
In the top view, the car is shown in its
actual condition during the manoeuvre;
any open doors or boot will be visible on
the image.
Opening the front doors and the boot
obscures the respective portion of the
view from above.
DEACTIVATION
By accessing the "Settings" menu in
the "Vehicle" page of the Alfa Connect
system, it is possible to enable or
disable the 10-second shutdown delay
of the 360° Surround system, using the
"Surround View Camera Delay" menu
If the "Surround View Camera Delay"
setting is disabled, the 360° Surround
system will be immediately deactivated
after reverse gear is disengaged.
Otherwise, if the "Surround View Camera
Delay" setting is enabled, the image will
continue to be displayed for 10 seconds
when reverse gear is disengaged, unless:
do not exceed 13 km/h
put the gear lever in P position
the "X" button in the top right-hand
corner of the screen is not selected.
Regardless of the "Surround View
Camera Delay" setting, if obstacles are
detected by the ParkAssist and Side
Distance Warning systems, the image
will remain on the screen to provide
visual warnings.
NOTES:
the front tyres are shown when the
wheels are steered
the images appear distorted due to the
wide-angle lens of the camera
opening the tailgate deletes the shot
of the rear of the car in the top view
159) 160) 161) 162)
61) 62) 63) 64) 65) 66)
185