Kenmore Go CSV DS4020 Use & Care Manual page 10

WARN IN G
Before charging make sure the unit is
turned OFF.
1. Insert the charging adapter plug into the
charging port on the side of the hand
vacuum base.
2. Plug the adapter into a wall outlet. The
battery indicator will begin to pulse
blue.
N OTE:
The unit can be charged while it is
hung on the wall mountable bracket. Attach
bracket to wall no more than 59'' from a
wall electrical outlet.
59"
(M aximum)
CHARGIN G
The battery requires approximately 4 hours
of charging to regain full capacity. W hile
the unit is charging, the battery indicator
ring will pulse blue. W hen the battery is
fully charged, the battery indicator will
show a continuous blue light, and turn off
after 15 minutes.
N OTE:
illuminate when charging, ensure that the
charging adapter is plugged in properly to
the wall outlet and the charging port on the
hand vacuum.
For better battery performance, it is
recommended to charge the unit when
the battery indicator shows a continuous
yellow light during operation, and remove
the charging adapter from the unit after the
battery is fully charged.
Never charge the batteries in temperatures
above 104°F (40°C) or below 39.2°F (4°C).
It is normal for the charger to become
warm when charging.
- 10 -
If the battery indicator does not
Battery Indicator