Troubleshooting - Silvercrest SHE 3 A1 Operating Instructions Manual

__GRA95821_B3.book Seite 13 Donnerstag, 5. September 2013 11:24 11
Removal
Press the button 6 and remove the roller holder upwards.
Attachment
1. Figure A: place the roller holder 2 on the top of the device
in such a way, that the cog wheels of the roller and the
device are above one another.
2. Press the roller holder 2 on to the device until it engages
audibly.
3. Check that it is secure.

11. Troubleshooting

If your device fails to function as required, please try this checklist
first. Perhaps there is only a minor problem, and you can solve it
yourself.
DANGER!
Do not attempt to repair the device yourself under any
circumstances.
Fault
The device cannot
be switched on.
Increased skin irrita-
tion.
Possible causes/Action
• Are the batteries flat?
• Did you press the release button 6
when switching the device on?
• Check whether the surface of the roller
is undamaged.
13
GB