Read Verification; Configuring The Standard 2 Of 5/Iata Options - Intermec SR60 Programmer's Reference Manual

Configuring the Standard 2 of 5/IATA Options

Check Digit
SET-------------------------------------
Don't Calculate
Calculate
Don't Transmit
Transmit
END------------------------------------
SR60 Scanner Programmer's Reference Manual
Chapter 4 — Enabling and Configuring Symbologies
• The No Second Fixed Length bar code on page 126
configures the scanner to recognize only the first fixed
length.

Read Verification

Read Verification is the number of times the scanner is required
to read the bar code data before sending the label data to the host.
Scan the following bar codes to configure the Standard 2 of 5/
IATA symbology options.
---------
---------
---------
---------
123