Room&Board ASPEN ROUND TABLE 36 Assembly Instructions & Product Info

ASSEMBLY TIPS : 5 Important Points You NEED to Read
1. Prior to beginning assembly, please inspect and inventory the parts to make sure
you have everything and that nothing was damaged during shipping. If damage has
occurred, please take photos and go to lolldesigns.com/damage. Rest assured we'll
get it taken care of straight away!
2. To avoid scratching furniture, assemble on a clean soft surface like a blanket, carpet, or
the flattened cardboard box the furniture was shipped in.
3. Start all bolts by hand to ensure proper alignment and to prevent cross threading.
Then using the Allen Key or Loll Tool, tighten until you feel resistance.
4. Bolts should not be forced, but some components, particularly the blocks will need a bit
of muscle to get them together as they are machined for a snug fit. If parts are still not
going together, please send us a photo of the part you are having trouble with.
5. You can use a cordless screw gun if you have one and know how to use it. Set the
clutch setting at low to medium torque. We do not recommend using an electric drill
without a clutch to install bolts as you can easily overtighten and damage the product.
LOLL TOOL BLOCK & BOLT INSTALLATION
Locate the box marked
Insert bolts through countersunk hole side of blocks
"Tool Included" before as shown below.
beginning assembly.
Countersunk
Hole
CORRECT
"Loll Designs inspires people to appreciate the outdoors."
RECYCLE THE PACKAGING
We've gone through great lengths to make as much of our packaging as possible recyclable.
The cardboard box, paper wrap, filler and paper bags can all go in your recycling bin. The
muslin hardware bags replaced plastic bags with the intention of reducing plastic and
encouraging reuse. Loll Designs and Planet Earth thank you!
WE WANT YOU TO LOVE YOUR LOLL
For more info and visual aids, watch the assembly videos at www.lolldesigns.com/videos
For product care & maintenance, visit www.lolldesigns.com/care-maintenance
For further lollygagging assistance, please reach out!
+1 877-740-3387
sales@lolldesigns.com
5912 Waseca Street
Duluth, Minnesota 55807
INCORRECT
Greg Benson - Founder/CEO
ASPEN ROUND TABLES
ASSEMBLY INSTRUCTIONS & PRODUCT INFO :
36 | 42 | 48
BY: