Proper Use Of The Dryer - Gardner Denver RHS20 SCFM Manual

1.2 WARNINGS
Compressed air is a highly hazardous energy source. Never work on the dryer while
Pressurized.
Never point the compressed air or the condensate drain outlet towards any person.
The user is responsible for the installation of the dryer, which has to be executed on the basis of
the instructions given in the Installation chapter. Otherwise, the warranty will be void or dangerous
situations for the personnel and/or damages to the machine could occur.
Only qualified personnel can use and service electrically powered devices. Before attempting any
maintenance action, the following conditions must be satisfied:
Be sure that no part of the machine is under voltage and that it cannot be connected to the mains.
Be sure that no part of the dryer is under pressure and that it cannot be connected to the
•
Compressed air system.
•
Any change to the machine or to the relevant operating parameters, if not previously verified and
authorized by the Manufacturer, will void the warranty and create the possibility of dangerous conditions.
Don't use water to extinguish fire on the dryer or in the surrounding area.

1.3 PROPER USE OF THE DRYER

This dryer has been designed; manufactured and tested to separate the humidity normally contained in
compressed air. Any other use has to be considered improper.
The Manufacturer will not be responsible for any problem arising from improper use; the user will be
responsible for any resulting damage.
Moreover, the correct use requires the inspection of the installation conditions, in particular:
Voltage and frequency of the mains
•
Pressure, temperature and flow-rate of the incoming air
•
Ambient temperature
•
This dryer is supplied tested and fully assembled. The only operation left to the user is the connection
to the factory, in compliance with the instructions given in the following chapters.
The purpose of the machine is the separation of water and eventual oil particles present in
compressed air. The dried air cannot be used for respiration purposes or for operations
leading to direct contact with food service.
This dryer is not suitable for the treatment of dirty air or of air containing solid particles.
2.1 TRANSPORTATION
Once unit integrity is verified, place the unit near installation point and unpack the contents.
To move the packaged unit we suggest using a suitable dolly.
•
Transportation by hand is discouraged.
•
Always keep the dryer in vertical position.
•
Turning it upside down could cause irreparable damage.
•
Even when packaged, keep the machine protected from the weather.
•
The packaging materials are recyclable.
4