Cover Plate Drawing; Fig. 116: Cover Plate Drawing; Table 66: Cover Plate Dimensions [Mm] - ABB HT613221 Operation Manual

Operation Manual / A150-M58/68
15 Taking out of operation at short notice / 15.5 Cover plate drawing
15.5

Cover plate drawing

The cover plate is not included in the Turbo Systems scope of delivery and must be manufac-
tured by the operating company according to the following drawing.
Material: General structural steel, in accordance with DIN EN 10025-2.
Fig. 116: Cover plate drawing
Product B1 B2 B3 B4 B5 B6 B7 ØD1 ØD2 R1 M
± 0.5 ± 0.2 ± 0.1 ± 0.2
A150 138.9 135 240 21.4 2.0 320 71.4 413.6 33 ≤ 196 M12
Table 66: Cover plate dimensions [mm]
© Copyright 2022 ABB. All rights reserved. HZTL4041_EN Rev.F February 2022