Fig. 76: Installing Gas Outlet Casing With Support 2 - ABB HT613221 Operation Manual

Operation Manual / A150-M58/68
10 Dismantling and fitting with removed air inlet and gas outlet / 10.19
Installing the gas outlet casing
Fig. 76: Installing gas outlet casing with support 2
7. Fit the screws of the support. Tighten in accordance with enginebuilder's specifications.
8. Fit insulation ring. Observe tightening torques (see Table of tightening torques →92).
9. Fit gas outlet casing insulation (see Table of tightening torques →92).
10. If present: Attach waste gate pipe. Tighten in accordance with enginebuilder's specifica-
tions.
© Copyright 2022 ABB. All rights reserved. HZTL4041_EN Rev.F February 2022