Fig. 91: Installing The Cartridge Group 2; Table 54: Tightening Torque (51007); Table 55: Tightening Torque (51007) With Spanner Holder - ABB HT613221 Operation Manual

Operation Manual / A150-M58/68
11 Dismantling and fitting, cartridge concept / 11.8 Installing the cart-
ridge group
Fig. 91: Installing the cartridge group 2
Product
A150-M58/68
Table 54: Tightening torque (51007)
Tighten the nuts that are difficult to access (51007) with a spanner holder (see
for fastening strips →141).
Product
A150-M58/68
Table 55: Tightening torque (51007) with spanner holder
1. Move the cartridge group into the turbine casing and align with the markings (M) made
on the bracket at the time of disassembly.
2. Use the hexagon to screw the threaded rod (42191) down to its stop.
3. Tighten pressure screws of clamping nut (see chapter --- FEHLENDER LINK ---).
4. Secure fastening strips (51002) together with nuts (51007) and Verbus Ripp® wash-
ers (51003).
© Copyright 2022 ABB. All rights reserved.
Size Tightening torque [Nm]
M16
Size Tightening torque [Nm]
M16
HZTL4041_EN
175
Special tools
85
Rev.F February 2022