Mounting On A Wall; Connections (Notifications); Antenna Connection - LG OLED55B7P-C Manual

Table of Contents

Advertisement

Mounting on a wall

Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the floor. When you attach the TV to other building materials, please
contact qualified personnel. LG recommends that wall mounting be
performed by a qualified professional installer. We recommend the
use of LG's wall mount bracket. The LG wall mount is easy to adjust or
to connect the cables. When you do not use LG's wall mount bracket,
please use a wall mount bracket where the device is adequately
secured to the wall with enough space to allow connectivity to
external devices. If you are using a non-adjustable mount, attach the
mount to the wall. Attach the cables to the TV first, then attach the
TV to the mount.
Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described
in the following table.
Separate purchase (Wall mounting bracket)
Model
VESA (A x B)
Standard screw
Number of screws
Wall mount bracket
B
• Remove the stand before installing the TV on a wall
mount by performing the stand attachment in reverse.
10cm
10cm
OLED55B7*
OLED55/65C7*
OLED65E7*
300 x 200
M6
4
OTW420B
A

Connections (notifications)

Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device's
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
• The external device connection may differ from the model.
• Connect external devices to the TV regardless of the order of the
TV port.
• If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.
• Refer to the external equipment's manual for operating
instructions.
• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the {Picture}
menu until the picture is clear.
• In PC mode, some resolution settings may not work properly
depending on the graphics card.
• Some USB Hubs may not work. If a USB device connected using
a USB Hub is not detected, connect it to the USB port on the TV
directly.
• If Ultra HD content is played on your PC, video or audio may
become disrupted intermittently depending on your PC's
performance.
• When connecting via a wired LAN, it is recommended to use a CAT
7 cable.

Antenna connection

Connect the TV to a wall antenna socket with an RF cable (75 Ω).
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
• Supported DTV Audio: MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
• This TV cannot receive ULTRA HD (3840 x 2160 pixels) broadcasts
directly because the related standards have not been confirmed.
7

Advertisement

Table of Contents
loading

Table of Contents