LG OLED55B7A Safety And Reference

LG OLED55B7A Safety And Reference

Hide thumbs Also See for OLED55B7A:
Table of Contents

Advertisement

Available languages

Available languages

Please read this manual carefully before operating your set and
retain it for future reference.
OLED55B7M
OLED55B7P
OLED55C7P
OLED55E7P
OLED55B7A
*MFL69707604*
Safety and Reference
OLED65B7M
OLED65B7P
OLED65C7P
OLED65E7P
OLED65B7A
P/NO : MFL69707604 (1705-REV02)
Copyright ⓒ 2017 LG Electronics Inc.
All Rights Reserved.
www.lg.com

Advertisement

Table of Contents
loading

Summary of Contents for LG OLED55B7A

  • Page 1 Please read this manual carefully before operating your set and retain it for future reference. OLED55B7M OLED65B7M OLED55B7P OLED65B7P OLED55C7P OLED65C7P OLED55E7P OLED65E7P OLED55B7A OLED65B7A www.lg.com P/NO : MFL69707604 (1705-REV02) *MFL69707604* Copyright ⓒ 2017 LG Electronics Inc. All Rights Reserved.
  • Page 2 Warning! Important Safety • Only use attachments/accessories specified by the manufacturer. instructions • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution Read these instructions. Keep these instructions. when moving the cart/apparatus combination to Heed all warnings.
  • Page 3 • Do not attempt to modify this product in any way without written authorization from LG Electronics. Unauthorized modification could void the user’s authority to operate this product.
  • Page 4 • When the TV is turned on for the first time after • Use only an authorized AC adapter and power being shipped from the factory, initialization of cord approved by LG Electronics. Otherwise, this the TV may take approximately one minute. may result in fire, electric shock, malfunction, or •...
  • Page 5: Lifting And Moving The Tv

    • Make sure that the screws are fastened tightly. • It is recommended to move the TV in the box or (If they are not fastened securely enough, the TV packing material that the TV originally came in. may tilt forward after being installed.) •...
  • Page 6: Using The Joystick Button

    Using the Joystick Button Mounting on a Table (Depending upon model) 1 Lift and tilt the TV into its upright position on a table. You can operate the TV functions, using the - Leave a 10 cm (4 inches) (minimum) space from button.
  • Page 7: Mounting On A Wall

    We recommend • Remove the stand before installing the TV that you use an LG brand wall mount. The LG wall on a wall mount by performing the stand mount is easy to adjust or to connect the cables.
  • Page 8: Magic Remote Functions

    Connections (Notifications) Connecting to an Antenna or Cable Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations You can connect various external devices to the TV. may differ from the actual items and an RF cable is Supported external devices are: HD receivers, DVD optional.
  • Page 9 Magic Remote Functions * You can access the application or Live TV channel by using the number buttons as registered. (Some buttons and services may not be provided * SAP (Secondary Audio Program) Feature can depending upon models or regions.) be enabled by pressing the key.
  • Page 10: Open Source Software Notice Information

    By zooming in on the selected area, you can view it in full screen. Supported licenses may differ by model. For more information about licenses, visit www.lg.com. * Provides content related to the program you are currently watching. * You can zoom in on the area where the remote control is pointed.
  • Page 11: Specifications

    Doing so may produce some are available for download. temporary distortion effects on the screen. LG Electronics will also provide open source code - This panel is an advanced product that contains to you on CD-ROM for a charge covering the cost millions of pixels.
  • Page 12 Specifications Regulatory Product specifications may be changed without FCC NOTICE prior notice due to upgrade of product functions. Estimated yearly energy consumption indicated on (For USA) the FTC label is measured in accordance with the This equipment has been tested and found to Test Procedures for Television Sets (USA only).
  • Page 13 FCC Radio Frequency Interference (For Canada) Requirements (for UNII devices) [For product having the wireless function using 5 GHz frequency bands] High power radars are allocated as primary users • The device for operation in the band 5150–5250 of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. MHz is only for indoor use to reduce the These radar stations can cause interference with potential for harmful interference to co-channel...
  • Page 14 WARNING! Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set.
  • Page 15 3.7 A / 370 W (48.3) (30.0) (10.0) (27.8) (1.9) (41.0) (37.9) OLED55B7P-U 1,229 48.6 20.5 17.2 3.7 A / 370 W OLED55B7A-U (48.3) (29.8) (8.8) (27.8) (1.9) (45.1) (37.9) 1,230 46.6 19.2 17.3 OLED55C7P-U 3.7 A / 370 W (48.4)
  • Page 16 The model and serial numbers of the TV are located on the back and on one side of the TV. Record them below should you ever need service. MODEL SERIAL...
  • Page 17: External Control Device Setup

    OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
  • Page 18: Key Codes

    KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 19 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (PC) (TV) • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 20 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
  • Page 21: Communication Parameters

    EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
  • Page 22: Transmission / Receiving Protocol

    EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 23 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 24 EXTERNAL CONTROL DEVICE SETUP 08. Color/Colour (Command: k i) 13. Treble (Command: k r) ► To adjust the screen Color(Colour). ► To adjust treble. You can also adjust colour in the PICTURE menu. You can also adjust in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min : 00 to Max : 64...
  • Page 25 EXTERNAL CONTROL DEVICE SETUP 18. Equalizer (Command : j v) * Analog Antenna/Cable ► Adjust EQ of the set. [Data 00][Data 01] Channel Data Transmission [j][v][ ][Set ID][ ][Data][Cr] Data 00 : High byte channel data Data 01 : Low byte channel data - 00 00 ~ 00 C7 (Decimal : 0 ~ 199) Data 02 : Input Source (Analog) - 00 : Antenna TV (ATV)
  • Page 26 EXTERNAL CONTROL DEVICE SETUP * Analog Antenna/Cable 2. Tune to the digital antenna (ATSC) channel 30-3. Set ID = All = 00 Data 00 : Physical Channel Number Data 00 = Don’t know Physical = 00 - Antenna (ATV) : 02~45 (Decimal: 2 ~ 69) Data 01 &...
  • Page 27 11 11 EXTERNAL CONTROL DEVICE SETUP 2. Tune to the BS (ISDB-BS) channel 30. 24. Input select (Command: x b) Set ID = All = 00 (Main Picture Input) Data 00 = Don’t know Physical = 00 ► To select input source for main picture. Data 01 &...
  • Page 28 EXTERNAL CONTROL DEVICE SETUP * [Data 02], [Data 03] functions depend on model 3) When [Data 00] is 06, 07 and signal. 00 : Off 01 : On * If [Data 00] is 00 (3D On), [Data 03] has no meaning.
  • Page 30 Seguridad y Consultas Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. OLED55B7M OLED65B7M OLED55B7P OLED65B7P OLED55C7P OLED65C7P OLED55E7P OLED65E7P OLED55B7A OLED65B7A www.lg.com Copyright ⓒ 2017 LG Electronics Inc. Todos los derechos reservados.
  • Page 31 ¡Advertencia! Instrucciones de • Use únicamente los accesorios recomendados por el fabricante. Seguridad Importantes • Use el producto únicamente en mesas portátiles, pies, trípodes, soportes o mesas indicados por el fabricante o provistos con el aparato. Al emplear Lea estas instrucciones. Conserve estas una mesa portátil, tenga cuidado al moverla con instrucciones.
  • Page 32 • No intente modificar este producto de ninguna manera sin autorización previa por escrito de LG Electronics. Cualquier tipo de modificación sin autorización previa podría anular la autoridad...
  • Page 33 • Cuando se enciende la TV por primera vez • Utilice sólo un adaptador de ca y el cable de después de ser enviada desde la fábrica, alimentación autorizado por LG Electronics. la inicialización de la TV puede tardar No hacerlo podría provocar un incendio, una aproximadamente un minuto.
  • Page 34: Levantar Y Trasladar El Televisor

    • Asegúrese de que los tornillos estén • Se recomienda trasladar el televisor en la caja o completamente ajustados. (Si no están lo el material de empaque en el que lo recibió al suficientemente ajustados, el TV puede comprarlo. inclinarse hacia delante después de instalarse.) •...
  • Page 35: Uso Del Botón

    - Deje un espacio mínimo de 10 cm (4 pulgadas) entre el televisor y la pared para asegurar una ventilación adecuada. 1 0 cm (4 p u lg a d a s ) 1 0 c m 1 0 c m 1 0 c 2 Conecte el cable de alimentación al...
  • Page 36: Montar En La Pared

    ésta en orden inverso. detalladas. Recomendamos que use un soporte de pared de marca LG. El soporte de pared LG hace • Para retirar el soporte, sujete la parte superior e que sea fácil ajustar o conectar los cables. Cuando inferior del soporte y, a continuación, extráigalo...
  • Page 37: Otras Conexiones

    Conexiones (Notificaciones) Conexión de una antena o un cable Para ver televisión, conecte una antena, un cable o una caja de cable. Las ilustraciones pueden diferir Se pueden conectar dispositivos externos al TV. Los de los elementos reales y el cable RF es opcional. dispositivos externos compatibles son: receptores de HD, reproductores de DVD, VCR, sistemas de •...
  • Page 38 Funciones del Control Remoto * Puede acceder a la aplicación o a los canales de TV en vivo utilizando los botones Mágico numéricos tal como se encuentran registrados. * La función SAP (Programa de audio secundario) también se puede habilitar si se (Algunos botones y servicios pueden no mantiene presionada la tecla.
  • Page 39: Software De Código Abierto

    * Puede expandir el área a la que apunta el Las licencias admitidas pueden variar según el control remoto. modelo. Para obtener más información sobre las * Para utilizar el botón, mantenga presionado licencias, visite www.lg.com. durante más de tres segundos.
  • Page 40: Especificaciones

    No toque la pantalla ni coloque los garantía y los avisos de derechos de autor. dedos sobre ella durante mucho tiempo. Esto LG Electronics también le proporcionará el código podría producir algunos efectos de distorsión fuente abierto en un CD-ROM con un cargo que temporales en la pantalla.
  • Page 41 - Consulte al distribuidor o a un técnico de radio/ TV experimentado para obtener ayuda. Este dispositivo cumple con el artículo 15 de las Módulo inalámbrico LG reglas de la FCC. El funcionamiento está sujeto a (LGSBWAC72) Especificación las siguientes dos condiciones: (1) este dispositivo no puede causar interferencia dañina y (2) este...
  • Page 42 Requisitos de interferencia de (Para Canadá) radiofrecuencia de la FCC (para dispositivos [Para productos que cuentan con la función UNII) inalámbrica que utilizan las bandas de frecuencia de 5 GHz] Los radares de alta potencia se encuentran • El dispositivo en la banda de 5 150 a 5 250 MHz asignados como los usuarios principales de las es solo para ser utilizado en interiores, así...
  • Page 43 ¡ADVERTENCIA! Nunca coloque una televisión en un lugar inestable. Se puede caer y provocar lesiones graves o la muerte. Puede evitar muchas lesiones, especialmente en niños, con tan solo tomar simples precauciones, como: • Usar los gabinetes o soportes recomendados por el fabricante de la televisión.
  • Page 44 3,7 A / 370 W (48,3) (30,0) (10,0) (27,8) (1,9) (41,0) (37,9) OLED55B7P-U 1 229 48,6 20,5 17,2 3,7 A / 370 W OLED55B7A-U (48,3) (29,8) (8,8) (27,8) (1,9) (45,1) (37,9) 1 230 46,6 19,2 17,3 OLED55C7P-U 3,7 A / 370 W...
  • Page 45 Los números de modelo y de serie del televisor se encuentran ubicados en la parte posterior del aparato. Regístrelos en el siguiente espacio por si alguna vez necesita recurrir al servicio técnico. MODELO SERIE...
  • Page 46: Manual Del Usuario

    MANUAL DEL USUARIO CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Lea atentamente este manual antes de poner en funcionamiento el equipo y consérvelo para futuras consultas. www.lg.com...
  • Page 47 CÓDIGOS DE TECLA CÓDIGOS De teCla • Esta función no está disponible en todos los modelos. Código Código Función Nota Función Nota (Hexa) (Hexa) CH +, PR + Botón RC Lista Botón RC CH -, PR - Botón RC Salir Botón RC Volumen + Botón RC...
  • Page 48 (TV) (PC) • LGTV admite el uso de un USB a convertidor de serie basado en chip PL2303 (ID de proveedor: 0x0557, RS-232C IN ID de producto: 0x2008) que LG no fabrica ni incluye. (CONTROL & SERVICE) (PC) (TV) •...
  • Page 49 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS (TV) (PC) (TV) (PC) Tipo de adaptador telefónico RS-232C IN RS-232C IN • Para realizar la conexión entre la PC y la TV, que se especifica en el manual, debe comprar el cable de (CONTROL &...
  • Page 50: Parámetros De Comunicación

    CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Parámetros de comunicación • Velocidad en baudios : 9600 bps (UART) • Bit de parada: 1 bit • Longitud de datos: 8 bits • Código de comunicación: código ASCII • Paridad: Ninguna • Use un cable cruzado (reversa). lista de referencia de comandos (según el modelo) Datos...
  • Page 51 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS Protocolo de transmisión/Recepción transmisión [Comando1][Comando2][ ][ID del televisor][ ][Dato][Cr] [Comando 1] : Primer comando para controlar la TV. (j, k, m o x) [Comando 2] : Segundo comando para controlar la TV. [ID del televisor] : Puede ajustar [ID del televisor] para elegir el número de ID del monitor que desea en el menú...
  • Page 52 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS * Según el modelo y la señal, los comandos podrán funcionar de un modo diferente. 01. Potencia (Comando: k a) 03. Screen Mute (Silencio de pantalla) (Comando: k d) ► Para controlar el encendido o apagado del dispositivo.
  • Page 53 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS 07. Brillo (Comando: k h) 12. Remote control lock mode (Modo de bloqueo del control remoto) (Comando: k m) ► Para ajustar el brillo de la pantalla. También puede ajustar el brillo en el menú ►...
  • Page 54 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS 16. Color Temperature (Temperatura de color) Datos (Comando: x u) 00: apagado 01: mínimo ► Para ajustar la temperatura de color. También 02: medio puede ajustar Color Temperature (Temperatura 03: máximo de color) en el menú IMAGEN. 04: Automático (para TV LCD/TV LED)/ Transmisión [x][u][ ][ID del televisor][ ][Dato] Intelligent sensor (Sensor inteligente) (para...
  • Page 55 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS ID del televisor = Todo = 00 - 0b : Cable DTV Plus – usar número de canal físico Datos 00 & 01 = Datos de canal es 1000 = 03 E8 Datos 02 = Satélite de TV digital = 40 - 2b : Cable DTV Plus –...
  • Page 56 11 11 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS - 09: CS2 (satélite de comunicación 2) • Para TV plasma ► Para controlar la luz del panel * Ejemplos de comandos de sintonización: 1 Sintonizar el canal Antena digital (ISDB-T) 17-1. Transmisión [m][g][ ][ID del televisor][ ][Dato] ID del televisor = Todo = 00 [Cr]...
  • Page 57 CONFIGURACIÓN DE DISPOSITIVOS DE CONTROL EXTERNOS * Si [Dato 00] es 01 (3D apagado) o 02 (3D a * Si la condición de la conversión no se cumple, el 2D), [Dato 01], [Dato 02] y [Dato 03] no son comando se trata como NG. relevantes.
  • Page 58 Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. FRANÇAIS Guide de configuration rapide Avant d’utiliser l’appareil, veuillez lire attentivement ce manuel et le conserver pour pouvoir vous y reporter ultérieurement. (M5 x L12) (M4 x L12) www.lg.com P/No: MFL69648424 (1702-REV00)
  • Page 59 ENGLISH Read Safety & Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références.
  • Page 61 ENGLISH Easy TV Connect Guide (Animation) ESPAÑOL Guía Rápida de Conexión del televisor (Sólo en Inglés) FRANÇAIS Guide simplifié pour la connexion du téléviseur (Offert en anglais seulement)
  • Page 64 : mm (inches / pulgadas / po) : kg (lbs / libras / lb) 1,229 1 229 48.6 48,6 18.6 18,6 17.2 17,2 OLED55B7M-U 3.7 A / 370 W 3,7 A / 370 W (48.3) (48,3) (30.0) (30,0) (10.0) (10,0) (27.8) (27,8) (1.9)

Table of Contents