Table of Contents
Advertisement
: Depending on model / Abhängig vom Modell / Selon le modèle / In base al modello / En función del modelo / Dependendo do modelo / Afhankelijk van het model /
Ανάλογα με το μοντέλο / Odvisno od modela / Típusfüggő / Zależnie od modelu / Závisí na modelu / V závislosti od modelu / În funcţie de model / В зависимост
от модела / Sõltub mudelist / Priklauso nuo modelio / Atkarībā no modeļa / U zavisnosti od modela / Ovisno o modelu / Në varësi të modelit / Ovisno o modelu /
Во зависност од моделот / Beroende på modell / Avhengig av modell / Afhængigt af modellen / Mallin mukaan /
www.lg.com
AA
12
14
16
20
d
c
X 5
(M4 X L12)
(M5 X L12)
a
X 4
P/No: MFL69649022 (1701-REV00)
OLED TV
OLED55B7*
OLED65B7*
b
Printed in Korea
Advertisement
Table of Contents
Related Manuals for LG OLED65B7D.AEU
Summary of Contents for LG OLED65B7D.AEU
- Page 1 от модела / Sõltub mudelist / Priklauso nuo modelio / Atkarībā no modeļa / U zavisnosti od modela / Ovisno o modelu / Në varësi të modelit / Ovisno o modelu / Во зависност од моделот / Beroende på modell / Avhengig av modell / Afhængigt af modellen / Mallin mukaan / P/No: MFL69649022 (1701-REV00) www.lg.com Printed in Korea...
- Page 5 ANTENNA / CABLE IN HDMI IN HDMI IN/ARC USB IN AUDIO OUT/ H/P OUT...
- Page 6 AUDIO OUT/ H/P OUT Satellite IN OPTICAL DIGITAL AUDIO OUT...
- Page 7 AV IN COMPONENT IN VIDEO L/MONO AUDIO R AUDIO VIDEO...
- Page 10 OLED55B7D-Z 1229 48.6 18.6 17.2 OLED55B7V-Z OLED65B7D-Z 1451 48.6 24.5 23.1 OLED65B7V-Z Power requirement AC 100-240 V ~ 50 / 60 Hz...
- Page 13 Safety and Reference Please read this manual carefully before operating your set and retain it for future reference. www.lg.com P/NO : MFL69727203 (1705-REV02) Printed in Korea *MFL69727203* Copyright ⓒ 2017 LG Electronics Inc. All Rights Reserved.
- Page 14 Warning! Safety instructions • Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off. You may be electrocuted due to excess moisture. •...
- Page 15 • Only use an authorized AC adapter and power cord approved by product may fall over, which may cause injury or damage the product. LG Electronics. Otherwise, this may result in fire, electric shock, • Do not turn the product On/Off by plugging-in or unplugging the malfunction or product deformation.
- Page 16 • Please follow the installation instructions below to prevent the • When cleaning the product and its components, unplug the power product from overheating. first and wipe it with a soft cloth. Applying excessive force may - The distance between the product and the wall should be more cause scratches or discolouration.
-
Page 17: Lifting And Moving The Tv
Lifting and moving the TV • Use a certified cable with the HDMI logo attached. • If you do not use a certified HDMI cable, the screen may not display or a connection error may occur. (Recommended HDMI Cable Types) Please note the following advice to prevent the TV from being scratched - High-Speed HDMI Cable (3 m or less) -
Page 18: Using The Button
Basic functions • Do not apply excessive pressure to cause flexing/bending of frame chassis as it may damage screen. • When handling the TV, be careful not to damage the protruding Power On (Press) buttons. Power Off (Press and hold) •... -
Page 19: Securing The Tv To A Wall
LG recommends that wall mounting be performed by a qualified professional installer. We recommend the use of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with cables connected. When you do not use LG’s wall mount bracket, please use a wall mount bracket where the device is adequately secured to the wall with enough space to allow connectivity to external devices. -
Page 20: Antenna Connection
• To remove the stand, hold the top and bottom of stand, then pull it • In PC mode, there may be noise associated with the resolution, out while also lowering it as shown below. (Only OLED55E7*) vertical pattern, contrast or brightness. If noise is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the brightness and contrast on the PICTURE menu until the picture is clear. -
Page 21: Usb Connection
USB connection (Depending on model) Some USB Hubs may not work. If a USB device connected through a USB Hub is not detected, connect it directly to the USB port on the TV. Other connections Connect your TV to external devices. For the best picture and audio quality, connect the external device and the TV with the HDMI cable. - Page 22 wxyz Control buttons ( ) Controls media contents. By zooming in on the selected area, you can view it in full screen. MENU * You can zoom in on the area where the remote control is pointed. These access special functions in some menus. * To use the button, press and hold for more than 3 seconds.
-
Page 23: Registering Magic Remote
Returns to the previous level. * Clears on-screen displays and returns to last input viewing. Shows programmes guide. Streaming Service buttons Connects to the Video Streaming Service. (INPUT) Changes the input source. - Pressing and holding the button displays all the lists of external inputs. -
Page 24: Troubleshooting
When connecting to the PC (HDMI), ‘No Signal’ or ‘Invalid Format’ is LG Electronics will also provide open source code to you on CD-ROM displayed. for a charge covering the cost of performing such distribution (such •... -
Page 25: Specifications
Specifications Abnormal Display • If the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with Wireless module specifications product. • As band channels can vary per country, the user cannot change or •... - Page 26 (Depending on country) Digital TV Analogue TV DVB-T DVB-T2 PAL/SECAM, B/G, D/K, I Television system DVB-C SECAM L DVB-S/S2 DVB-S/S2 DVB-C DVB-T/T2 VHF III : 174 ~ 230 MHz Channel coverage UHF IV : 470 ~ 606 MHz 46 ~ 862 MHz (Band) 950 ~ 2150 MHz 46 ~ 890 MHz...
-
Page 27: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 28: Key Codes
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button... - Page 29 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (TV) (PC) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 30 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
-
Page 31: Communication Parameters
EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA... -
Page 32: Transmission / Receiving Protocol
EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99. - Page 33 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 34 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 35 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 36 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 37 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 38 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...