Gas Cylinder; Checking For Leaks - RUSTA 623514760101 Manual

GAS CYLINDER

• Maximum size of gas cylinder of H: 800 x B: 350 mm.
• The gas cylinder must not be dropped or handled carelessly.
• If the pizza oven is not going to be used, the gas cylinder must be disconnected and
the safety cap refitted.
• The gas cylinder must never be placed in locations where it is exposed to
temperatures over 50 °C. You should therefore not put the gas cylinder directly under
the pizza oven. The gas cylinder must not be placed or stored in locations where there
is a risk of fire or sparks, for example.
• Do not smoke in the immediate vicinity of the gas cylinder.
• It is prohibited to make your own modifications to the gas cylinder. This can have
fatal consequences.
CONNECTING THE GAS CYLINDER TO THE PIZZA OVEN
• Make sure that the gas cylinder's valve is turned off.
• Connect the regulator to the gas cylinder's valve.
• Connect the hose to the pizza oven's nipple connector.
• Check that the hose is not clogged, knotted or lying against any part of the pizza oven
other than the nipple.
• Check for leaks in the gas cylinder, regulator, hose and pizza oven before starting to
ignite the pizza oven. See the section "CHECKING FOR LEAKS".

CHECKING FOR LEAKS

• Mix 50% soap with 50% water. Check that the gas valve on the gas cylinder is closed
and that the knob on the pizza oven is turned off.
• Apply the soap solution onto the gas cylinder's valve, regulator, hose and connector
to the pizza oven.
• Open the gas valve on the gas cylinder. If there are small bubbles in any of the parts
mentioned above, there is a leak.
• Close the gas valve and tighten the hose connectors. Perform the test again! If there
is still a leak, contact your Rusta store.
IM_623514760101_623514760102_Pizza_oven_v5.indd 5 IM_623514760101_623514760102_Pizza_oven_v5.indd 5
5
2021-12-22 09:12 2021-12-22 09:12