CARE AND MAINTENANCE
Cleaning Your Wine cooler
Upon installation of your new appliance, it is recommended that it be cleaned thoroughly.
•
Unplug the unit from the wall outlet.
•
Remove all contents.
•
Wash the inside with a damp warm cloth soaked in lukewarm water and baking soda solution.
•
The solution should be about 2 tablespoons of baking soda to a quart of water.
Wash the racks with a mild detergent solution.
•
Be sure to keep the door gasket (seal) clean to keep the unit running efficiently.
•
The outside of the wine cooler should be cleaned with mild detergent and warm water.
•
Dry the interior and exterior with a soft cloth.
•
Dust or anything else blocking the vent may hinder the cooling efficiency of the wine cooler.
•
Vacuum the vent if necessary.
Vacation Time
Unplug the unit from the wall outlet.
•
Remove all the contents.
•
Clean the wine cooler.
•
Short vacations: Leave the wine cooler operating during vacations of less than three weeks.
•
Long vacations: If the appliance will not be used for several months, remove all content and
•
unplug the power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth,
leave the door open slightly: blocking it open if necessary.
Moving Your Wine cooler
Unplug the unit from the wall outlet.
•
Remove all the contents.
•
Securely tape down all loose items inside your wine cooler.
•
Tape the doors shut.
•
Energy Saving Tips
The wine cooler should be located in the coolest area of the room, away from heat producing
•
appliances or heating ducts, and out of the direct sunlight.
Ensure that the door is closed when the wine cooler is turned on.
•
6
EN
Need help?
Do you have a question about the R-MCWC6B and is the answer not in the manual?
Questions and answers