IMPORTANT SAFETY INSTRUCTIONS
WARNING
Read all instructions before using the wine cooler.
•
Never clean wine cooler parts with flammable fluids. The fumes can create a fire
•
hazard or explosion.
Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
•
of this or any other wine cooler. The fumes can create a fire hazard or an explosion.
INSTALLATION INSTRUCTIONS
Before Using Your Wine cooler
Remove the exterior and interior packing.
•
Clean the interior surface with lukewarm water using a soft cloth. (Cleaning instruction on page 6)
•
Installing Your Wine cooler
This appliance is designed to be free standing only, and should not be recessed or built-in.
•
Allow 5 inches of space between the back and sides of the wine cooler, which allows the proper
•
air ventilation. Adjust the legs to keep the wine cooler level.
Locate the wine cooler away from direct sunlight and sources of heat (stove, heater, radiator,
•
etc.). Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. If the ambient temperature is higher than 80°F or lower than 55°F it will hinder the
performance of this appliance. This unit is not designed for use in a garage or any other
outside installation.
Avoid locating the wine cooler in moist areas.
•
Plug the wine cooler into dedicated, properly installed-grounded wall outlet. Do not under any
•
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized service center. This unit is not designed to be installed in an RV or used with an
inverter.
After plugging the appliance into a wall outlet, allow the unit to cool down for 3 ~ 4 hours under
•
before placing wine bottles in the wine cooler.
To reduce the risk of fire, electrical shock,
or injury when using your wine cooler,
follow these basic precautions:
-Save these instructions-
3
EN
Need help?
Do you have a question about the R-MCWC6B and is the answer not in the manual?
Questions and answers