TCP/IP Settings
Windows 8
To configure TCP/IP in Windows 8, follow the procedure below.
1
Open Control Panel.
2
Click Network and Internet.
3
Click Network and Sharing Center.
4
Click Change adapter settings on the left side menu.
5
Right-click on the network adapter, then click Properties.
6
If the User Account Control screen opens, click Yes or Continue.
7
Select Internet Protocol Version 4 (TCP/IPv4) then click Properties.
8
To have DHCP set your IP address settings automatically, check Obtain an IP address automatically and Obtain DNS
server address automatically.
Alternately, you can configure the settings manually. Example:
If the router's IP address is 192.168.11.1,
IP address 192.168.11.80
Subnet mask 255.255.255.0
Default gateway 192.168.11.1
Preferred DNS server 192.168.11.1
Alternate DNS server blank
9
Click OK.
58