Using Client Manager 3; Status - Buffalo WI-U2-866D User Manual

Using Client Manager 3

• When you install Client Manager, it will be added to your Startup folder and will automatically start with Windows.
• Right-click on the Client Manager icon in the system tray and click Exit to close Client Manager.
The Client Manager icon will change appearance according to its connection status:
: No wireless client installed
: Not connected to an access point
: Transmitting to an access point with TKIP or AES encryption
: Transmitting to an access point with WEP, or not encrypted
: Transmitting in ad-hoc mode (not supported with this wireless client)
: Authenticating

Status

The Status screen displays the current connection status.
Parameter
Profile
SSID
Adapter Name
Network Type
Transmission Speed
Channel
Security
IP Address
MAC Address
Duration
Meaning
Current connection profile name.
SSID of the currently connected access point.
Name of the wireless client currently in use.
Current network mode.
Current transmission speed.
Current wireless channel.
Displays whether security is currently enabled or not.
The IP address assigned to this unit.
MAC address of this unit.
Elapsed duration of the current wireless connection.
43