Buffalo WI-U2-866D User Manual page 53

Issue:
Though I am able to successfully make a connection with my wireless router, I am unable to access the Internet with my
web browser.
Answer:
First, power off the cable or DSL modem, the wireless router, and then your computer. Pressing the power button or simply
unplugging the devices can power off the modem and wireless router devices. Then after verifying that the modem is
connected to the wireless router with a cable to the WAN port, power on the modem and wait two minutes. Turn on the
wireless router and then the computer. Verify whether an Internet connection is available.
If, after these steps, an Internet connection is still unavailable, power off the cable or DSL modem and computer again
and directly connect your computer to the cable or DSL modem with a cable between the computer and the port on the
modem. Power on the modem and wait two minutes. Power on the computer and again check for an Internet connection.
If an Internet connection IS NOT available with a direct connection to the computer, please call the Internet Service
Provider who installed the modem.
If an Internet connection IS available with a direct connection to the computer, please call our customer support line.
Issue:
Where can I download the latest drivers, firmware and instructions for my Buffalo wireless products?
Answer:
The latest drivers and firmware with installation instructions are available online at
www.buffalotech.com
53