Chapter 4 Client Manager
Software Overview
Client Manager is utility software used to connect to an access point on the network or to verify the connection
between an access point and your computer. It is included with this device.
Note:
Two versions of Client Manager are included on your AirNavigator CD. Client Manager V supports Windows 8,
Windows 7, and Windows Vista. Client Manager 3 supports Windows XP. The installation program will install the
correct version for your operating system.
Using Client Manager V
Opening and Closing Client Manager
•
When you install Client Manager, it will be added to your Startup folder and will automatically launch with Windows.
•
To close Client Manager, right-click on its icon in the system tray and choose Exit.
•
The appearance of the Client Manager icon varies according to its connection status.
No wireless connection.
Communicating via an access point.
Main Screen
The Main screen displays the current connection status. You can perform the following operations from this screen.
Parameter
Profile
Transmission Speed
Signal Strength
Meaning
Displays information about the current connection points.
If you have multiple connection points, you can switch among them.
Displays the current connection speed.
Displays the current signal strength.
30