Door Locking And Unlocking Methods - Jocel JLR013934 Instruction Manual

Horizontal adjustment

Adjust the level of the washing machine to avoid additional noise and vibrations.
Install the washing machine on a hard and horizontal floor (the corner of a room is
preferred).

If the floor is not flat, please adjust the adjustable feet. (Do not insert objects such as
wood chips under the adjustable feet). Make sure that the four adjustable feet are in
contact with the floor firmly and check that the washing machine is horizontal. (Using
a spirit level is allowed)

Adjust the adjustable feet so that the washing machine is flat and stable on the floor.
After position adjustment, screw the locknuts tightly to keep the washing machine
stable.

Do not place the washing machine on a table on the floor to prevent it from falling
accidentally.

When pressing any position on the diagonals of the worktop of the washing machine,
the washing machine cannot shake. (Check on both diagonals. If the washing
machine still shakes, please adjust the adjustable feet again).

DOOR LOCKING AND UNLOCKING METHODS

Door locking
After startup, the door will be locked automatically and cannot be opened. Then, the "Lock" light/icon on
the control panel illuminates.
Door unlocking
When the "Lock" light/icon on the control panel illuminates, press the "Start/Stop" key. After the washing/spin
drum stops rotating, wait for 2 minutes until the door is unlocked automatically. Foams may rise from the drum
during washing. Please catch them with a towel.
During washing, the door cannot be opened at high temperature. During washing, the door cannot be
opened with high water level.
Notes: During normal operations, do not use the pull ring to open the door. If it is necessary to use
it, please stop operations and open the door until the water gets cool.
Hot water may scald users. At the same time, please pay attention to the outflow of residual water
in the drum.
57