Installation Instructions - Jocel JLR013934 Instruction Manual

INSTALLATION INSTRUCTIONS

•
The environmental temperature of places to install or place the washing machine shall not be below 0
°C. Do not install or place the washing machine outdoors
•
Follow management practices and regulations to correctly place the washing machine.
•
When the washing machine is installed on a floor with a carpet, do not block the ventilation orifice of
the base.
•
There are many insects in the countryside. Please keep the surroundings of the washing machine clean.
The warranty does not cover any damage caused by cockroaches or other insects.
Shipping bolts
The shipping bolts are used to prevent internal damage of the washing machine during transport.
Disassembling the shipping bolts and the bottom panel
1. Open the package, remove the packaging base and move the washing machine to the installation place.
2. Disassemble the 4 shipping bolts, rubber pads and plastic rods (see Figure 1).
If the shipping bolts are not dissembled, they may cause intense vibrations, noise and faults. The shipping
bolts shall be installed every time before the washing machine is transported.
3. Use the supplied plastic plugs to cover the four holes. (see Figure 2).
4. Fix the bottom panel below the washing machine. (see Figure 3).
Fig. 1
Fig. 2
53
Fig. 3