Hilti NURON NPR 32 XL-22 Manual page 30

5.4.3 Position/stroke table
Pos. Stroke Application
1 40 mm 12.0 mm ... 66.7 mm
(with NPR PS M & NPR PR M)
16.0 mm ... 75.0 mm
(with NPR PS G & NPR PR G)
12.0 mm ... 108.0 mm
(with NPR PS V & NPR PR V)
12.0 mm ... 63.0 mm
(with NPR PS TH & NPR PR TH)
12.0 mm ... 110.0 mm
(with NPR PS U & NPR PR U)
2 80 mm 76.1 mm ... 108.0 mm
(with NPR PR M)
3 100 mm Industrial application
5.5 Installing the crimping/pressing/adapter jaw
CAUTION
Risk of injury! The accessory tool may be hot and/or have sharp edges.
▶ Wear protective gloves when changing the accessory tool.
▶ Never lay down a hot accessory tool on a flammable surface.
WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before inserting, changing or removing the crimping/pressing/adapter jaws.
Never operate the product without a pressing jaw installed!
1. Select the suitable crimping/pressing/adapter jaw.
2. Turn the tool head so that the locking pin is easily accessible.
3. Press the locking pins.
4. Rotate the locking pins counterclockwise as far as they will go.
▶ The locking pin pops out.
5. Install the crimping/pressing/adapter jaw.
6. Push the locking pins in until they engage.
The locking pin is engaged correctly when it projects slightly on the other side of the crimp-
ing/pressing/adapter jaw.
5.6 Removing the crimping/pressing/adapter jaw
CAUTION
Risk of injury! The accessory tool may be hot and/or have sharp edges.
▶ Wear protective gloves when changing the accessory tool.
▶ Never lay down a hot accessory tool on a flammable surface.
WARNING
Risk of injury! Unintentional starting.
▶ Remove the battery before inserting, changing or removing the crimping/pressing/adapter jaws.
1. Turn the tool head so that the locking pin is easily accessible.
2. Press the locking pins.
24 English
5
6
2321727
*2321727*