Receiving And Transmitting; Operation - Dynascan F-15 Instruction Manual

1. Make sure your radio is turned OFF.
2. Plug the micro-USB cable into the micro-USB charging port on your radio. Connect the
other end of the AC/DC adapter to wall power outlet.
3. The battery LCD icon will move to indicate the battery is charging.
Turning ON and OFF the radio:
1. Press and hold the [ ] key to turn your radio ON/OFF.
2. The LCD shows the current channel, the code and all features enabled.
Setting the volume:
1. Press [▲] key to increase the volume. Press [▼] key to decrease it.
2. When the volume is set to 0 level, the mute icon

RECEIVING AND TRANSMITTING:

To communicate, all PMR-446 radios in your group must be set to the same channel and
the same code.
1. To talk, press and hold the [PTT] key. When transmitting, the
the [PTT] when you are finished talking. Do not use the radios closer than five feet
distance.
2. When receiving, the
Monitor key:
1. Press and hold the [Mon/Scan] key for 3 seconds to open the squelch and listen for
weak signals on the current channel.
2. You can also press the [Mon/Scan] key to check for activity on the current channel
before you talk.
3. Release the key to exit monitor mode.
PTT Time out Timer:
When you press [PTT] key for more than 60 seconds, radio will stop transmitting. This is to
prevent accidental transmission.

OPERATION:

Setting the channel:
1. Press and hold the [MENU] key until the channel number starts to flash.
2. Press [▲] or [▼] key to change the channel number. Press the [PTT] key to exit menu.
icon is shown.
English - 16 -
appears permanently on screen.
icon is shown. Release