Error Displays - Clarion MAX685BT Owner's Manual & Installation Manual

9. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
DVD Player
Display
ERROR 2
ERROR 3
ERROR 6
PARENTAL
VIOLATION
WRONG REGION
DRM
NOT SUPPORT
USB Devices
Display
ERROR 2
ERROR 3
(MTP player/USB
memory)
ERROR 3 (iPod)
ERROR 5 (iPod/
MTP player)
Cause
A disc is caught inside the
DVD player and is not
ejected.
A disc cannot be played
due to scratches, etc.
A disc is loaded upside-
down inside the DVD
player and does not play.
Parental level error
Region code error
WMA files protected by
DRM are played.
Files not supported by this
unit are played.
Cause
The connected USB device
is not supported.
An error occurred when
controlling the USB device.
The selected category has
no track data.
The iPod is frozen.
The connected USB device
is not recognized.
Measure
This is a failure of DVD player's mechanism.
Consult your store of purchase.
Replace with a non-scratched, non-warped disc.
Eject the disc then reload it properly.
Set the correct Parental level.
Eject the disc, and replace correct region code
disc.
Perform the operation such as skipping a file.
(Repeat and random playback mode may be
canceled.)
Measure
If the USB device is frozen, disconnect it, reset it,
and reconnect it again.
Connect a proper USB device.
Disconnect the USB device, and reconnect it
again.
Press the [F] button. If the error is not cleared,
disconnect the iPod, and reconnect it again.
Disconnect the iPod, reset it, and reconnect it
again.
Disconnect the USB device, and reconnect it
again. If the USB device is still not recognized, try
replacing with a different USB device.
If the USB device is frozen, disconnect it, reset it,
and reconnect it again.
67
MAX685BT