Manual Controls; Silence; Lamp Test; Zone Selection - 4EVAC 4E-FMWB Installation And User Manual

Hacousto Holland bv
Industrieweg 87
2651BC Berkel & Rodenrijs
4E-FMWB installation and user guide

Manual controls

5.2.1. SILENCE

Press to mute the sound of the buzzer in the entire system.

5.2.2. LAMP TEST

Press to verify visual (LEDs) and audible indications (buzzer) of the local front panel.

5.2.3. ZONE selection

Press to select a zone. Press again to deselect.
NOTE: Zone selection will clear automatically after the timeout triggers, which is defined in the configuration
settings.

5.2.4. RESET

Press to clear your current zone selection.

5.2.5. FUNCTION button

Press and hold the FUNCTION button to enable Access level 2. In access level 2 you are able to manually
change the status of the system by triggering a voice alarm message or resetting the system.
NOTE: Press the FUNCTION button first and hold it down before pressing another button.
5.2.5.1.
Use this combination in order to trigger an EVAC or ALERT message on the previously selected zones.
If no zones are selected, EVAC or ALERT will be triggered to all zones accessible from local front panel.
Page 14 of 17
FUNCTION + EVAC / FUNCTION + ALERT
Author: DD