5
6. ADJUSTMENT
1. At shipment, the unit is adjusted to its best conditions. Normally, it is not necessary to readjust even if an assembly is replaced.
2. Use a stable AC power supply.
6.1 POSSIBLE CASES WHERE READJUSTMENT IS REQUIRED
When any of the following assemblies is replaced
POWER SUPPLY Unit
MR MAIN Assy
Other assemblies
When any part in the following assemblies is replaced
POWER SUPPLY Unit
MR MAIN Assy
Other assemblies
5
6
No adjustment required
No adjustment required
No adjustment required
The assembly must be replaced as a unit, and no part
replacement is allowed.
No adjustment required.
However, IC4804, IC4806, IC5207, IC6001, IC6003 and
IC6201 must not be replaced. In this case, the assembly
must be replaced as a unit.
No adjustment required
PDP-R06G
6
7
7
8
A
B
C
D
E
F
23
8