Pioneer PDP-R06G Service Manual page 36

1
A
No. Function/Display
1 COLOR BAR1
2 COLOR BAR2
3 RAMP1
4 RAMP2
5 RAMP3
6 RAMP4
7 RAMP5
B
8 RASTER1
9 RASTER2
10 RASTER3
Important notice of the Test Signal mode (SG mode, SG pattern)
• The route switching should be done correctly in the factory mode.
• Y or G signal from SG should be input to the AVI terminal of the MVDEC when the SG signal is output.
• The function of the blanking offset (50 IRE) should be OFF during the SG mode.
• The setting of the Y/C separation function should be set to the NTSC during the SG mode
• Only the RGB and Component signals can be output during SG mode, so only the Y signal is input at the CVBS and S
signal mode, thus the picture is composed in black and white color. This isn't a trouble.
C • The SG mode 7 (ANA AD RGB) is only for the factory mode. Therefore some probrem (strange color, unstable brightness
etc.) might be happened.
4. SIDE MASK LEVEL
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
1 I N I T I A L I Z
2
3
4
5
6
D
7
8
9
10
11
12
13
14
S I D E M A S K
15
16
Level of the side mask (R, G, and B) can be adjusted by using this menu.
The input signal is necessary to adjust it.
No. Display
E
R MASK LEVEL ⇔
1
G MASK LEVEL ⇔
2
B MASK LEVEL ⇔
3
F
36
1
2
SG Pattern (Brightness
IRE Level/Color)
Colorbar (75%)
Colorbar (100%)
Ramp (100% white)
Ramp (100% Yellow)
Ramp (75% Green)
Ramp (75% Red)
Ramp (75% Blue)
Raster (100% White)
Raster (75% Yellow)
Raster (75% Cyanide)
E V D 1 – 1 1 6 0 1 – N T V – J H S 6
L E V E L ( + )
Adjust Side Mask R (range :000-255)
Adjust Side Mask G (range :000-255)
Adjust Side Mask B (range :000-255)
PDP-R06G
2
3
No. Function/Display
11 RASTER4 Raster (75% Green)
12 RASTER5 Raster (75% Magenta)
13 RASTER6 Raster (75% Red)
14 RASTER7 Raster (75% Blue)
15 RASTER8 Raster (-% Black)
16 10STEP1 10STEP (100% white)
17 10STEP2 10STEP (100% Yellow)
18 10STEP3 10STEP (75% Green)
19 10STEP4 10STEP (75% Red)
20 10STEP5 10STEP (75% Blue)
Context
3
4
SG Pattern (Brightness
IRE Level/Color)
RS-232C
RSL
GSL
BSL
4