Storage and Installation Getting Started Opening your product What's Included Connecting to the mains Charging Cables Registration Cleaning your ModIT-Boss Help and Support Installing Host System Product Specifications Input Power Requirements Error flag rail values Physical specifications Packaged information Consumables and Placing Orders...
This manual has been arranged to follow IEC/ICEE 82079-1 standard. This is to facilitate the easier understanding and location of information relating to the ModIT-Boss. Any errors or omissions can be reported using our support ticket system (seeHelp and Support). This way, any...
Read operating instructions Product modification Cambrionix products are designed and manufactured to meet the requirements of UK and International safety regulations. Modifications to the product could affect safety and render the product non-compliant with relevant safety standards, resulting in injury or damage to the...
Do not allow liquids to come into contact with the unit or power supply CAUTION Damage to your product may occur Do not short circuit the Power Supply Unit (PSU) supplied with your product Do not disconnect the power cord while the product is being used Page 5 of 23 ModIT-Boss...
Do not place the power cord near heat sources Connect the plug to an earthed socket CAUTION Damage to your Cambrionix product may occur Operate the product only in an environment where the ambient temperature is inside the operating temperature range...
This manual provides a reference for end-users installing for the first time and using their hub after that. As well as a guide for product safety-related information The ModIT-Boss is intended to be used in an indoor static environment in which the environment falls within the tested specifications to provide charge, sync and management functionality.
Charging Your ModIT-Boss will allow your device to charge at the maximum rate possible up to . The way that charging takes place is the ModIT-Boss will provide the device with a capability to charge...
If there is a dirt/ spillage over a ventilation slot, external data/ power connector or product aperture, please remove power from the unit without touching the liquid and contact Cambrionix immediately Ensure that the product is switched off and the power cord is removed from the product.
Page 10
Device Information Plate which is either on the underside or back of the unit Providing serial and Purchase order numbers, can help identify the product in question faster, and speed up the process Page 10 of 23 ModIT-Boss...
Remove these using a screwdriver and slide the top of the Boss Module four inches, as demonstrated in the image below The image below demonstrates how the product should look at this stage. Notice the highlighted yellow screws, which should all have been removed at this point Page 11 of 23 ModIT-Boss...
Page 12
(highlighted in yellow), to remove the Mac mini chassis Once you have removed the Mac mini chassis place your Mac mini on the circular mat outsides highlighted below). You can then attach the Mac mini to the three wires on the left Page 12 of 23 ModIT-Boss...
Page 13
Once the Mac mini is secure, reattach the Mac mini chassis, and the side panels in the same order that they were removed Page 13 of 23 ModIT-Boss...
0.19 x 0.57 m 0.57 Boxed Dimensions Consumables and Placing Orders Below is a list of any Consumable products you may require for your ModIT-Boss including the cables you will require to connect devices to the hub Page 14 of 23 ModIT-Boss...
Page 15
(available from what's included section These can be ordered from the reseller or solution partner you purchased your ModIT-Boss from, or from Cambrionix directly To find one of our partners local to you please visit www.cambrionix.com/partners...
August 12, 2005, and should not be disposed of as unsorted municipal waste. Please utilize your local WEEE collection facilities in the disposition of this product and otherwise observe all applicable requirements ." Cambrionix PRN (Producer Registration Number) For the UK is "WEE/BH191TT Page 17 of 23 ModIT-Boss...
If you have not purchased the Product(s) direct from Cambrionix please contact the vendor the item was originally purchased from for their returns process Once you have notified Cambrionix of your return, Cambrionix will arrange for the collection of the product(s), or provide instructions and details for you to return the product direct When returning your product(s), please only send back the items that were advised...
Page 19
Product(s) not returned in their original condition may result in additional costs, please refer to the warranty and terms section on our website Where Cambrionix arranges collection, return shipping will be free, unless Cambrionix notified you otherwise When contacting us about returning a product please provide the following information...
CB Certificate Complies with EN60950 safety requirements for IT equipment FCC Part 15 Tested and marked Housed within a UL94-VO specification fire enclosure RoHS Compliant Independently safety tested by the Underwriters Laboratory (UL) under file #E346549 Page 20 of 23 ModIT-Boss...
Page 21
This manual may make reference to trademarks, registered trademarks, and other protected names and /or symbols of third-party companies not related in any way to Cambrionix. Where they occur these references are for illustrative purposes only and do not represent an...
Page 22
Grant Number Application Number Link Title 2489429 1105081.2 GB2489429 Syncing and Charging Port 00002646615 2646615 UK00002646615 CAMBRIONIX 00002646617 2646617 UK00002646617 CAMBRIONIX VERY INTELLIGENT 6089600 6089600 GB2591233 MOD IT DS 007918669 007918669 eSearch MOD IT 90079186690001 0001 007918669 90079186690001 MOD IT 90079186690002...
Need help?
Do you have a question about the ModIT-Boss and is the answer not in the manual?
Questions and answers