Intermec EasyCoder 7421 User Manual page 18

The Feed/Pause button, located on the left side of the printer,
performs these functions depending on the printer mode:
Idle Feed out one label
or a minimum
specified amount of
media.
Continuously feed
media.
Take the printer
offline.
Printing Pause the printer.
Cancel the current
print job.
Powered on Print the hardware
for the first configuration label.
time
Print the software
configuration label
Print the pitch
label.
Press and release the Feed/Pause
button.
Press and hold the Feed/Pause
button. When you release the
button, the media stops feeding.
Press the Feed/Pause button
twice. Press the button again to
bring the printer online.
Press and release the Feed/Pause
button. Press and release the
button again to resume printing.
Press and hold the Feed/Pause
button until the printer stops
printing.
Press and hold the Feed/Pause
button while you turn on the
printer.
Press the Feed/Pause button after
the hardware configuration label
stops printing.
Press the Feed/Pause button after
the software configuration label
stops printing.