Related Manuals for LawnMaster TE1318W1
Summary of Contents for LawnMaster TE1318W1
- Page 1 Operator's Manual 18" 13.5 Amp Tiller TE1318W1 (MODEL: WR7025-1500-13.5-450H1) Save this manual for future reference Read all safety rules and instructions carefully before operating this tool.
-
Page 2: Table Of Contents
Page TABLE OF CONTENTS SPECIFICATIONS IMPORTANT SAFETY INSTRUCTIONS SYMBOLS KNOW YOUR TILLER ASSEMBLY 11-13 OPERATION 14-16 MAINTENANCE 17-20 TROUBLESHOOTING ® LAWNMASTER WARRANTY EXPLODED VIEW 23-24 PARTS LIST 25-26 NOTES 27-28 SPECIFICATIONS Model WR7025-1500-13.5-450H1 Voltage 120 V ~ 60 Hz Current 13.5 A... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS TO REDUCE RISK OF INJURY: Before any use be sure everyone using this product reads and understands all safety instructions and other information contained in this manual. CAUTION: Wear appropriate personal hearing protection during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss. - Page 4 IMPORTANT SAFETY INSTRUCTIONS ■ It is possible to tie the extension cord and power cord in a knot to prevent them from becoming disconnected during use. Make the knot as shown, then connect the plug end of the power cord into the receptacle end of the extension cord.
- Page 5 IMPORTANT SAFETY INSTRUCTIONS out of children's reach. ■ MAINTAIN UNIT WITH CARE - Keep clean for best performance and to reduce the risk of injury. Inspect extension cord periodically and replace if damaged. Keep handles dry, clean and free from oil.
- Page 6 IMPORTANT SAFETY INSTRUCTIONS WARNING: The electrical cords on this product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. WARNING: Some dust and debris created by the use of this tool could contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
- Page 7 IMPORTANT SAFETY INSTRUCTIONS ■ Take all possible precautions when leaving the machine unattended. Disengage the power take-off, lower the attachment, shift into neutral, stop the motor, and remove the key (if applicable). ■ Before cleaning, repairing, or inspecting, shut off the motor and make certain all moving parts have stopped.
-
Page 8: Symbols
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second) - Page 9 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, DANGER will result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, WARNING could result in death or serious injury.
-
Page 10: Know Your Tiller
KNOW YOUR TILLER The safe use of this product requires an understanding of the information on the product and in this Operator’s Manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. Components 6. -
Page 11: Assembly
ASSEMBLY UNPACKING This product requires assembly. ■ Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. ■ Inspect the product carefully to make sure no breakage or damage occurred during shipping. ■... - Page 12 ASSEMBLY WARNING Do not connect power supply until assembly is complete. Failure to comply could result in accidental starting and possible serious personal injury. WARNING Never operate the tool without the proper safety devices in place and working. Never operate the tool with damaged safety devices.
- Page 13 ASSEMBLY ASSEMBLING THE HANDLES Connect the upper handle and the middle handle to the lower handle using the carriage bolts and wing nuts (Fig. 3 & 4). Fig. 3 Fig.4 FIXING THE POWER CORD Mount the cable and the cable clips on the right handle bar (in the working direction) by pushing them on (Fig.
-
Page 14: Operation
OPERATION WARNING Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. WARNING Do not switch on the tool until it has been completely assembled. Before switching on the tool, always check the power cord for signs of damage. - Page 15 OPERATION 8. Always ensure that a safety distance (provided by the long handles) is maintained between the user and housing. The safe distance between housing and user given by the handle must always be observed. Be especially careful when digging and changing direction on slopes and inclines. 9.
- Page 16 OPERATION CLEARING FOREIGN OBJECTS During operation, a stone or root could become lodged in the tines, or tall grass or weeds may become wrapped around the tine shaft. To clear the tines or tine shaft release the trigger lever, wait for the tines to come to a complete stop and unplug the tiller.
-
Page 17: Maintenance
MAINTENANCE WARNING When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING Always wear gloves when handling the tiller. WARNING Prior to all maintenance and cleaning work always switch off the tool, disconnect the plug from the power socket and wait until the tiller is standing still. - Page 18 MAINTENANCE contributes to an accurate and simple dig up for your bed. 7. At the end of the season, carry out a general check of the electric tiller, and remove all residue collected. Before the start of the every season, it is absolutely necessary to check the state of the machine.
- Page 19 MAINTENANCE Fig.11 Fig. 12 Fig. 13 ADDING TRANSMISSION LUBRICANT (FIG.14) Drain screw plug is located on the right side of transmission housing. Lay the tiller on its left from user's perspective side and clean the transmission of dirt and debris prior to removing the drain screw plug.
- Page 20 MAINTENANCE CARBON BRUSHES In case of excessive sparking, have the carbon brushes checked only by a qualified electrician. DANGER The carbon brushes should not be replaced by anyone but a qualified electrician. TRANSPORT AND STORAGE Always disconnect the tool from the power supply before transporting and storage! Pull the lock pin. You can now move the wheels to the lower position.
-
Page 21: Troubleshooting
TROUBLESHOOTING Suspected malfunctions are often due to causes that the user can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING Only perform the steps described within these instructions! All further inspection, maintenance and repair work must be performed by an authorized service center or a similarly qualified specialist if you cannot solve the problem yourself! Problem Possible Causes... -
Page 22: Lawnmaster ® Warranty
® LAWNMASTER WARRANTY We take pride in producing a high quality, durable product. This Lawnmaster product carries a limited ® two (2) year warranty against defects in workmanship and materials from date of purchase under normal household use. If product is to be used for commercial, industrial or rental use, a 30 day limited warranty will apply. -
Page 23: Exploded View
EXPLODED VIEW... - Page 24 EXPLODED VIEW...
-
Page 25: Parts List
PARTS LIST Key Number Drawing Number Description Quantity 171002101 Tool Free Blade Assembly (Right) Tool Free Blade Assembly (4 pcs Assembly) 171002102 Right 171002103 Tool Free Blade Pin Assembly 171002104 Screw Bolt 171002105 Locknut Gear Box Assembly 171002107 Tool Free Blade Assembly (4 pcs Assembly) Left 171002108 Tool Free Blade Assembly (Left) Screw... - Page 26 PARTS LIST Key Number Drawing Number Description Quantity 171002132 Wheel Cover 171002133 R Pin 171002134 φ10 Flat Key 171002135 Wheels Wheel Axle Assembly Replacement parts highlighted in grey are available for after sales purchase. Replacement of repair or internal parts should only be done by a qualified service professional. Please contact your authorized service dealer or Customer Service at 866-384-8432.
-
Page 27: Notes
NOTES... - Page 28 NOTES...