Tennant 5400 Operator And Parts Manual
  1. Manuals
  2. Brands
  3. Tennant Manuals
  4. Scrubber
  5. 5400
  6. Operator and parts manual

Tennant 5400 Operator And Parts Manual

Scrubber-dryer
Hide thumbs Also See for 5400:
Table of Contents

Advertisement

Quick Links

ENGLISH - ESPAÑOL - FRANÇAIS
5400
Scrubber-Dryer
Fregadora-Secadora
Brosseuse-Sécheuse
Operator and Parts Manual
Manual De Operador
Y Lista De Repuestos
Opérateur Manuel et
Liste Des Piéces
Model Part No.:
606931 - Disc Standard, 610 mm (24 in)
606932 - Disc ES, 610 mm (24 in)
607525 - Disc Wand Prep, 610 mm (24 in)
606933 - Disc Deluxe, 610 mm (24 in)
606934 - Cylindrical Standard, 610 mm (24 in)
606935 - Cylindrical ES, 610 mm (24 in)
607526 - Cylindrical Wand Prep, 610 mm (24 in)
606936 - Cylindrical Deluxe, 610 mm (24 in)
610877 - Disc Standard, 660 mm (26 in)
610878 - Disc ES, 660 mm (26 in)
610879 - Disc Wand Prep, 660 mm (26 in)
610880 - Disc Deluxe, 660 mm (26 in)
398040 - Disc FaST, 610 mm (24 in)
398041 - Disc FaST, 660 mm (26 in)
606862
The Safe Scrubbing Alternative
Rev. 09 (12-2006)
*606862*
www.tennantco.com
Home Find... Go To..

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 5400 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Tennant 5400

Summary of Contents for Tennant 5400

  • Page 1 ENGLISH - ESPAÑOL - FRANÇAIS 5400 Scrubber-Dryer Fregadora-Secadora Brosseuse-Sécheuse Operator and Parts Manual Manual De Operador Y Lista De Repuestos Opérateur Manuel et Liste Des Piéces Model Part No.: 606931 - Disc Standard, 610 mm (24 in) 606932 - Disc ES, 610 mm (24 in)
  • Page 2 PO Box 1452 Minneapolis, MN 55440 Phone: (800) 553--8033 or (763) 513--2850 www.tennantco.com E1998, 1999, 2000, 2001, 2002, 2003, 2006 Tennant Company Printed in U.S.A. FaST Foam Scrubbing Technology logo and ES are registered United States trademarks of Tennant Company.

  • Page 3: Table Of Contents

    ..... WAND SOLUTION GROUP ....Tennant 5400 (02- -06) Home Find... Go To..

  • Page 4: Safety Precautions

    Machine. All repairs must be performed by a qualified service person. WARNING: Actuator Pinch Point. Stay Clear Do not modify the machine from its Of Head Lift Area. original design. Tennant 5400 (04- -05) Home Find... Go To..

  • Page 5: Safety Labels

    MOVING PARTS LABEL - - LOCATED WARNING: Keep sparks and ON THE SCRUB HEAD SHROUD. open flame away. Keep battery hood open when charging. WARNING: Moving parts. Turn off power before working on machine. Tennant 5400 (02- -06) Home Find... Go To..

  • Page 6: Machine Components

    21. Solution Fill Port 34. Circuit Breaker Panel 22. Solution Flow Adjustment Knob 35. Solution Tank Level Hose 23. Squeegee Vacuum Hose 36. Parking Brake (Option) 24. Squeegee Assembly 37. Interchangeable Cylindrical Brush Scrub Head Tennant 5400 (04- -05) Home Find... Go To..

  • Page 7: Control Console Symbols

    Circuit Board 2A Fuse Solution Switch & Solution Control Parking Brake (Option) Drive Motor 15A Brush Pressure Circuit Breaker Meter Read Manual Before Operating FaST System Battery Charge 10A Circuit Breaker (option) Meter Tennant 5400 (04- -05) Home Find... Go To..

  • Page 8: Machine Installation

    (See Maximum battery dimensions are 181 mm (7.13 in) W MACHINE OPERATION). Charge batteries if x 260 mm (10.25 in) L x 292 mm (11.50 in) H. necessary. Tennant 5400 (02- -06) Home Find... Go To..

  • Page 9: Machine Setup

    Secure pad with centerlock (Figure 7). FIG. 4 4. Connect the vacuum hose to the squeegee assembly. Loop the hose as shown using the hose clip provided (Figure 5). FIG. 7 Tennant 5400 (04- -05) Home Find... Go To..

  • Page 10: (For Cylindrical Brush Scrub Head Model)

    FOR SAFETY: When using machine, always follow the FaST Scrub Mode for 3 minutes (See the handling instructions on chemical container. MACHINE OPERATION). This step is only required for first time FaST system use. Tennant 5400 (04- -05) Home Find... Go To..

  • Page 11: Filling Solution Tank

    All conventional cleaning agents/restorers must be FOR SAFETY: When using machine, follow mixing drained and rinsed from solution tank. Check and handling instructions on chemical containers. FaST--PAK agent level, replace carton as needed. Tennant 5400 (04- -05) Home Find... Go To..

  • Page 12: Operating Machine

    3. Turn the key and solution switch to the ON position. 4. To conventional scrub with a FaST model, make sure the FaST system switch is in the off (O) position (Figure 17). FIG. 20 FIG. 17 Tennant 5400 (04- -05) Home Find... Go To..

  • Page 13: Emergency Stopping (Option)

    2. Make sure that the solution tank is filled with clear cool water only. DO NOT add conventional cleaning agents in solution tank. Conventional cleaning agents/restorers in the solution tank will result in premature FaST system failure. FIG. 23 Tennant 5400 (04- -05) Home Find... Go To..

  • Page 14: Operating Es (Option)

    Operate Machine In Or Near Flammable Liquids, trip and floor damage may occur. Vapors Or Combustible Dusts. 4. Periodically observe recovery tank for excessive foam. Pour a recommended foam control solution into recovery tank if excessive foam appears. Tennant 5400 (04- -05) Home Find... Go To..

  • Page 15: Operating Off--Aisle Wand (Option)

    2. Connect solution hose to quick disconnect coupler located behind right drive wheel (Figure 28). FIG. 31 FIG. 28 Tennant 5400 (04- -05) Home Find... Go To..

  • Page 16: Circuit Breakers / Fuse

    FIG. 32 FIG. 34 CIRCUIT BREAKERS / FUSE DRAINING TANKS The 5400 is equipped with five resettable circuit breakers and one fuse to protect machine from Drain recovery tank: damage. If a circuit breaker should trip during After each use.

  • Page 17: Adjusting Scrub Head

    (Figure 36). 4. Turn solution switch to the off position. 5. Turn speed control knob to slowest setting and slightly rotate control grips forward for 2 seconds while holding machine in one spot. Tennant 5400 (04- -05) Home Find... Go To..
  • Page 18 4. If scrub head is not level, loosen lock nut and turn scrub head leveling screw clockwise to lower rear brush width or counter--clockwise to lower front brush width, 1 inch wrench required (Figure 40). Tennant 5400 (05- -03) Home Find... Go To..

  • Page 19: Removing Brushes/Pads

    (Figure 44). FIG. 43 FIG. 44 6. Replace idler plate and recheck brush pattern, 4. Squeeze retaining clip on centerlock to remove readjust if necessary. pad (Figure 45). FIG. 45 Tennant 5400 (07- -02) Home Find... Go To..

  • Page 20: Cylindrical Scrub Head

    Cylindrical brushes should be replaced if bristles are worn to a length of 10 mm (0.38 in) or less. Two types of scrub heads are available for the 5400 NOTE: Always replace brushes as a set. Never model, disc brush and cylindrical brush. They are replace just one.

Table of Contents

Save PDF