Table of Contents
Advertisement
The following section will address the capabilities and the general operation of the Pelsue Model #1000 Centrifugal
Blower. The instructions contained within this section should be adhered to each and every time the product is used.
Any person tasked with installing or operating this piece of equipment should be familiar with these procedures.
The Pelsue Model #1000 Centrifugal Blower is built with a rugged steel housing and internal steel and/or aluminum
components. The Pelsue #1��� Centrifugal Blower is specifi cally designed for confi ned space applications. All speci-
fications, instructions, and procedures provided within this manual or upon Pelsue Specification Documents are based
upon and only valid for usage with Pelsue accessories. The T.A. Pelsue Company can not verify equipment safety and/
or compliance when utilized with anything other than Pelsue approved confined space accessories.
Centrifugal Blower - #1000
General Specifications
• Weight
• Height
• Width
• Length
Features:
• Low Maintenance
• Specifically designed to provide a completely portable source of fresh air
Materials & Construction
• Main Structure:
• Hardware
Additional Requirements & Notes
• The #1��� Centrifugal Blower is a single-speed blower.
#112920-001 - Product Manual: Model #1000 CENTRIFUGAL BLOWER - Revision 05 - Date: 06-04-2015
1��� Centrifugal Blower is specifi cally designed for confi ned space applications. All speci-
-
35 lbs.
-
16-5/8"
-
16-1/2"
-
18-1/8"
- Steel
- Plated Steel
5.0 - Product Operation
5.1 - Product Description & Capabilities
is specifically designed for confined space applications. All speci-
Model Specifications & Performance - #1000
• Voltage
• Amperage
• H.P.
• Free Air
• One 9�º Bend
• Two 9�º Bends
Figure #5.1a: #1000
Centrifugal Blower
12�VAC, 6�Hz
6.2
1/3 (.248kW)
1�9� CFM (3�.9 m3/min)
773 CFM (21.9 m3/min)
7�� CFM (19.8 m3/min)
Page 13
Advertisement
Table of Contents
