General Safety Information - Pelsue 1000 Product Manual

4.2 - General Safety Information

Safety Precautions:
It is necessary to follow these safety precautions, each time, prior to using the product.
The Safety Precautions are not limited to, but must include the following items;
1. Do not use the blower for anything other than its intended use.
2. Do not wear loose clothing that can become entangled in operating machinery. Do not operate the blower without
inlet or outlet screen guards in place.
3. Do not place fingers or any other object through inlet or outlet screens.
4. Always operate the blower from a properly grounded receptacle.
5. Never handle energized power cords with wet hands.
6. Never let extension cords or plug connections lay in water. Locate the blower so that it cannot fall into water
inadvertently.
7. Never use cords with frayed , cut, or brittle insulation. Check the cord for sound connections to the ground fault
interrupter receptacle.
8. Never use this blower in an explosive environment.
9. Ensure that toxic fumes are not blown into a confined space.
10. Unattended use of equipment is not recommended.
! CAUTION ! - Be sure the blower is disconnected from the power source before doing any
maintenance or repair work on the blower.
!
! CAUTION ! - Check all power cords for cuts, frayed ends, or brittle insulation. See parts list
for replacement cord part number.
! CAUTION ! - The user must ensure that the blower is located where it cannot fall into water
inadvertently and the extension cords or plug connections do not lay in water.
Page 12
#112920-001 - Product Manual: Model #1000 CENTRIFUGAL BLOWER - Revision 05 - Date: 06-04-2015