Table of Contents
Advertisement
5.0 - Product Operation
The following section will address the capabilities and the general operation of the Pelsue Model #1453 Centrifugal
Blower. The instructions contained within this section should be adhered to each and every time the product is used.
Any person tasked with installing or operating this piece of equipment should be familiar with these procedures.
5.1 - Product Description & Capabilities
The Pelsue Model #1453 Centrifugal Blower is built with a rugged steel housing and internal steel and/or aluminum
components. The Pelsue #1�53 Centrifugal Blower is specifi cally designed for confi ned space applications. All specifi -
cations, instructions, and procedures provided within this manual or upon Pelsue Specification Documents are based
upon and only valid for usage with Pelsue accessories. The T.A. Pelsue Company can not verify equipment safety and/
or compliance when utilized with anything other than Pelsue approved confined space accessories.
Centrifugal Blower - #1453
General Specifications
• Weight
• Height
• Width
• Length
Features:
• Low Maintenance
• Specifically designed to provide a completely
portable source of fresh air
Materials & Construction
• Main Structure:
• Hardware
Page 12
1�53 Centrifugal Blower is specifi cally designed for confi ned space applications. All specifi -
-
�5 lbs.
-
19-7/8"
-
18"
-
18-3/8"
- Steel
- Plated Steel
is specifically designed for confined space applications. All specifi-
Model Specifications & Performance - #1453
• Fuel
• Maximum RPM
• H.P.
*** Reported air flow based on maximum RPM ***
• Free Air
• One 90º Bend
• Two 90º Bends
Additional Requirements & Notes
• The #1�53 Centrifugal Blower is a variable speed blower.
Figure #5.1a: #1453
Centrifugal Blower
#111325-001 - Product Manual: Model #1453 CENTRIFUGAL BLOWER - Revision 04 - Date: 06-05-2015
Gasoline
3600
� (2.98kW)
1526 CFM (�3.2 m3/min)
1360 CFM (38.5 m3/min)
1255 CFM (35.5 m3/min)
Advertisement
Table of Contents
