Moen SW0181C Installation Instructions Manual page 3

1
确认供水角阀及排污口预留尺寸
Check angle valve and drain pipe dimension
十字线标记
Mark cross lines
* 供水角阀为自购件，不包含在马桶产品包装里。
* 排污口孔径请参考相关建筑标准，通常为110mm。
* 排污管的坑距通常305mm或400mm，也有一些定
制款只有200mm或者250mm，安装前请检查坐便器
坑距。
2
在中心位置做标识
Mark center line of drain hole on toilet
Mounting hole
安装固定孔
a. 在地上垫一块厚纸板或者泡沫保护垫。
b. 将坐便器轻轻侧放于保护垫上。
c. 坐便器排污口为中心，在产品对称左右前后面分
别用记号笔做标记线。
* Angle valve
* 供水角阀
* 地面排污管
* Drain pipe
* Angle valve is self-purchased part, not included in
toilet product package.
* Drain pipe diameter need to comply with building
standard specification, which is 110mm generaly.
* Pit distance is 305mm or 400mm generaly, some
customized products can be 200mm or 250mm.
Please check the pit distance before installation.
Drain hole
排污口
Floor protector
保护垫
a. Put a protector, such as presspaper or foam panels, on
the floor.
b. Lay the tolie down on it's side on the floor protector.
c. Mark the center line of the drain hole on the side of the
toilet.
3
200mm
至坐便器方向
Toward to toilet
150mm
Maker pen
Maker line
INS10634C - 11/18
*有些定制款坑距为200mm或
者250mm等。
*Some customize toilet will
only have 200mm or 250mm
pit distance.