Ä Tone Parameters - Roland JX-8P User Manual

Parameter Guide
TONE Parameters
TONE COMMON
JX-8P
Parameter Value
(name) Tone name
Catg
CATEGORY
8
Explanation
Selects the tone's category.
TONE
JX-8P
Parameter Value Explanation
OSC1 RANGE 16' , 8' , 4' , 2' Specifies the octave of OSC1.
SAW,
PULSE, Specifies the waveform that is the basis of the
OSC1 WAVEFORM
SQR, OSC1 sound.
NOISE
OSC1 TUNE -12–+12 Adjusts the OSC1 pitch.
Adjusts the depth to which LFO modulates
OSC1 LFO MOD 0–100
OSC1.
Adjusts the depth to which the ENV specified
OSC1 PIT ENV
-100–+100 by OSC ENV MODE affects the OSC1 pitch
envelope.
OSC2 RANGE 16' , 8' , 4' , 2' Specifies the OSC2 octave.
SAW,
PULSE, Selects the waveform that is the basis of the
OSC2 WAVEFORM
SQR, OSC2 sound.
NOISE
OFF,
Selects the MOD MODE type (OFF, SYNC,
OSC2 MOD MODE SYNC,
X-MOD).
X-MOD
OSC2 TUNE
-12–+12 Adjusts the OSC2 pitch.
OSC2 FINE TUNE -50–+50 Finely adjusts the OSC2 pitch.
Adjusts the depth to which the LFO
OSC2 LFO MOD 0–100
modulates OSC2.
Adjusts the depth to which the ENV specified
OSC2 PIT ENV
-100–+100 by OSC ENV MODE affects the OSC2 pitch
envelope.
Adjusts the sensitivity at which the velocity
PITCH DYNAMICS 0–3
controls the depth of the pitch envelope.
ENV1, Selects the envelope that is used to control
OSC ENV MODE
ENV2 the OSC.
OSC1 LEVEL 0–255 Adjusts the OSC1 volume balance.
OSC2 LEVEL 0–255 Adjusts the OSC2 volume balance.
Adjusts the depth to which the envelope
MIXER ENV
0–63 specified by MIXER ENV MODE controls the
DEPTH
OSC2 level.
Adjusts the sensitivity at which the velocity
MIXER DYNAMICS 0–3
controls the depth of MIXER ENV.
ENV1, Selects the envelope that is used as MIXER
MIXER ENV MODE
ENV2 ENV.
Sets the cutoff frequency of the high-pass
HPF-STEP 0–3
filter in four steps.
Selects one of three response curves, each
VINTAGE FLT TYPE R, M, S
modeling the LPF of an analog synthesizer
of the past.
Specifies the cutoff frequency of the low-pass
filter. The frequency region above the cutoff
CUTOFF
0–1023
frequency is cut, producing a more mellow
tonal character.
Boosts the region of the filter's cutoff
frequency. Higher values produce a stronger
RESONANCE 0–1023
result, giving the sound a distinctively
synthesizer-like character.
Adjusts the amount by which the LFO
FILTER MOD 0–100
modulates the cutoff frequency.
Adjusts the amount by which the envelope
FLT ENV DEPTH -1023–+1023 selected by FLT ENV MODE controls the cutoff
frequency.
Adjusts the amount by which the keyboard
pitch affects the cutoff frequency (key follow).
FLT KEY FOLLOW 0–200
With smaller values, the cutoff frequency
becomes lower as you play higher notes.
Adjusts the sensitivity at which velocity
FILTER DYNAMICS 0–3
controls the depth of FILT ENV DEPTH.
ENV1, Selects the envelope that is used to control
FLT ENV MODE
ENV2 FILTER.
AMP LEVEL 0–127 Adjusts the volume of the tone.
Selects whether the volume is controlled by
ENV2,
AMP ENV SEL ENV2 (ENV2) or stays at a fixed volume as
G-ENV2
long as the key is held down (G-ENV2).
CC#
47
20
26
22
62
87
56
16
17
108
3
9
28
81
82
110