Battery Status Lights - Intermec Janus 2020 Quick Reference Manual

Battery Status Lights

The battery LEDs allow you to monitor the status of the battery pack that is
inserted in each battery slot. The following table shows the possible lighting
combinations that you may see and the status each indicates.
JANUS 2020 Battery Charger Quick Reference Guide
= off = on
Note: When an LED flashes, it is either a solid,
intermittently flashing light, or a dim, rapidly
flashing light.
The dock or charger is waiting for a battery, or
there is no power to the dock or charger.
The battery is about to begin charging.
The battery is charging.
The battery is charged and ready.
The discharge button has been pushed and
the slot is waiting for a battery to discharge.
The battery is discharging.
The battery did not charge in the allotted
time. The battery may be damaged.
The battery has poor contact with the battery
slot contacts or the battery may be damaged.
(Discharge and Ready LEDs flash alternately)
A battery has been inserted that is not
supported by the dock or charger.
(all three LEDs flash in order)
The battery temperature is out of range.
(Discharge and Ready LEDs flash
alternately with Charge LED)
A battery has been inserted
that may be damaged.
(all three LEDs flash together)
= flashing
2020Q.006
11