Material Compatibilities; Disinfecting Surfaces - Cheyenne HAWK spirit Operating Instructions Manual

Pay attention to compatibility of mate-
rials when selecting cleaning agents
and disinfectants (see the following
chapter "7.1 Material compatibilities").
7.1

Material compatibilities

Wherever possible, use one of the
following disinfectants
Manufacturer Product
Big Spray
Antiseptica
'new'
Bode
Bacillol
Chemie
Incidin
Ecolab
Foam
Schülke & Mikrozid
Mayr Liquid
Based on the following material compat-
ibilities, you can assess which other clean-
ing agents and disinfectants are suitable
However, check the material compatibility
in an inconspicuous location.
The anodized aluminum components of
the HAWK SPIRIT and HAWK THUNDER are
resistant to:
Weak acids (e.g. acetic acid ≤ 10%, citric
acid ≤ 10%)
Aliphatic fluorocarbons (e.g. pentane,
hexane)
Cheyenne HAWK spirit & HAWK thunder
The anodized aluminum components of the
HAWK SPIRIT and HAWK THUNDER are not
resistant to:
Exposure time
1 to 5 mins
30 s to 1 min
1 to 2 mins
7.2
1 to 2 mins
Before and after each usage:
Ethanol
Most inorganic salts and their aqueous
solutions (e.g. sodium chloride, calcium
chloride, magnesium sulphate)
Strong acids (e.g. hydrochloric acid,
sulphuric acid, nitric acid)
Oxidizing acids (e.g. peracetic acid)
Lyes (e.g. caustic soda, ammonia and all
substances with a pH value > 7)
Aromatic/halogenized fluorocarbons
(e.g. phenol, chloroform) as well as
acetone and benzene

Disinfecting surfaces

Disinfect all surfaces of the HAWK SPIRIT
or HAWK THUNDER and its accessories
as described in chapter "5.1 Disinfecting
equipment" on page 36.
EN 45