Table of Contents
Advertisement
PowerKon QE
Assembly, installation and operating instructions
6.2.2 Fitting the grille
High surface temperatures occur at the electric heating coil. For this reason, additional grille fixings are factory-fitted on both
longitudinal sides of the duct as a safety guard. They can be removed using a screwdriver. The grille fixing only needs to be
removed on one side, the electrical connection side, when wiring. Once wiring has been completed, attach the grille fixing
again as per the figure.
Fig. 4: Installation of the roll-up grille
CAUTION: Do not cover the roll-up grille when the units are in operation!
19
Advertisement
Table of Contents
