Advertisement
with appropriate overcurrent protection. Please refer to the electrical
requirements on the nameplate. Please make sure that your unit has its own
dedicated outlet. Do not use an extension cord.
Please pay close attention to the safety notices in this section.
Disregarding these notices may lead to serious injury and/or damage to
the unit.
ATTENTION
■ To minimize shock and fire hazards, be sure not to overload outlet. Please
designate one outlet for your unit.
■ Do not use extension cords.
■ Do not put your hands under the unit when the unit is required to be moved.
■ When the unit is not in use for a long period of time, please unplug the unit
from the outlet.
■ After unplugging the unit, wait at least 10 minutes before re-plugging it.
Failure to do so could cause damage to the compressor.
UNPLUG CORD
■ To minimize shock and fire hazards, please do not plug or unplug the cord
with wet hands.
■ During maintenance and cleaning, please unplug the unit.
PROPER GROUDING REQUIRED
■ To minimize shock and fire hazards, make sure that the unit is properly
grounded.
PROHIBITION
■ Do not attempt to remove or repair any component unless instructed by
factory.
■ Make sure that the unit is not resting on or against the electrical cord and
plug.
■ To minimize personal injury, do not hang on the doors.
■ Do not store any flammable and explosive gas or liquids inside the unit.
SAFETY / WARNING
- 3 -
Advertisement
