Phonebook - Panasonic KX-TGF892 Operating Instructions Manual

Phonebook

You can add 100 names (16 characters max.) and
phone numbers (24 digits max.) to the phonebook,
and assign each phonebook entry to the desired
group (page 34).
Important:
R All entries can be shared by the base unit and
any registered handset.
Adding phonebook entries
Handset / Base unit
1
Proceed with the operation for your unit.
Handset: MFN
Base unit: M N a MMENUN
2
MbN: "Add new entry" a MSELECTN
3
Enter the party's name. a MOKN
4
Enter the party's phone number. a MOKN
5
MbN: Select the desired group. a MSELECTN
2 times
6
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
Note for handset and base unit:
R In step 3, you can switch the language for
entering characters.
# a MbN: Select the desired language. a
MOKN
Note for base unit:
R You can also add entries as follows:
Press M N. a MADDN a Go to step 3.
Entering characters
Press the dial key that corresponds to the desired
character. Press repeatedly to scroll through the
available characters.
The following operations are also available.
Key Operation
* Switch between the uppercase and
lowercase
(A « a)
MFN MEN Move the cursor
MCLEARN Erase the character or number
R To erase all, press and hold it.
For assistance, please visit http://shop.panasonic.com/support
KX-TGF892_(en-us)_0426_ver201.pdf 33
a MMENUN
R To enter another character that is located on the
same dial key:
Handset: Press MEN to move the cursor to the
next space.
Base unit: Press M N to move the cursor to
the next space.
R If you do not press any dial key within 2
seconds after entering a character, the
character is fixed and the cursor moves to the
next space.
Storing a redial list number to the phonebook
Phone numbers of up to 24 digits can be stored in
the phonebook.
Handset
1
MEN REDIAL
2
MbN: Select the desired entry. a MSAVEN
3
To store the name, continue from step 3,
"Editing entries", page 34.
Base unit
1
MREDIALN
2
MbN: Select the desired entry. a MSAVEN
3
To store the name, continue from step 3,
"Editing entries", page 34.
Note for handset and base unit:
R The name stored in the phonebook will be
reflected in the redial list after you make a call
using that phonebook entry.
Storing caller information to the phonebook
Handset
1
MCN CID
2
MbN: Select the desired entry. a MMENUN
R To edit the number: MbN: "Edit" a
MSELECTN
Press MEDITN repeatedly until the phone
number is shown in the desired format a
MSAVEN a MbN: "Phonebook" a
MSELECTN a Go to step 4.
3
MbN: "Save phonebook" a MSELECTN
4
Continue from step 3, "Editing entries",
page 34.
Base unit
1
MCIDN
Phonebook
33
4/26/2022 3:14:18 PM