Operating A Bluetooth Headphone - Panasonic KX-TGF892 Operating Instructions Manual

Using Bluetooth® Headphone
Unpairing a Bluetooth headphone
You can remove the Bluetooth headphone
information stored in your handset.
1
Press MPAIRN. a MbN: Select the desired
headphone. a MSELECTN
2
MbN: "Unpair" a MSELECTN
3
MbN: "Yes" a MSELECTN
R A long beep sounds.
4
MOFFN
Changing the headphone name
The name of the paired headphone will be
displayed while talking using a Bluetooth
headphone or in the headphone list. You can
customize the name of paired Bluetooth
headphones.
1
Press MPAIRN. a MbN: Select the desired
headphone. a MSELECTN
2
MbN: "Change name" a MSELECTN a
Enter the desired name (16 characters max.).
3
MSAVEN a MOFFN
Note:
R When the headphone is unpaired, the
headphone name stored in the handset will be
deleted.
Changing the Bluetooth PIN
(Personal Identification Number)
The PIN is used to pair the headphone to the
handset. The default PIN is "0000". If your
headphone PIN is not "0000", change the
Bluetooth PIN beforehand.
Important:
R Please make note of your new PIN. The unit will
not reveal the PIN to you. If you forget your PIN,
see page 67.
1
MMENUN #645
R If the unit prompts you to enter the old PIN
(When the default has been changed), enter
the current 4-digit PIN.
2
Enter the new 4-digit PIN. a MOKN
3
Enter the new 4-digit PIN again. a MSAVEN
a MOFFN
18 For assistance, please visit http://shop.panasonic.com/support
KX-TGF892_(en-us)_0426_ver201.pdf 18
Operating a Bluetooth
headphone
Important:
R Refer to your headphone's operating
instructions for details.
R Some features described here may not be
available depending on Bluetooth headphone.
R Make sure that the headphone is turned on.
Making calls with your headphone
Important:
R Only 1 Bluetooth headphone can be used with
the unit at a time.
R Make sure that the Bluetooth headphone is not
connected to another Bluetooth device.
1
Lift the handset and then dial the phone
number.
R To correct a digit, press MCLEARN.
2
Press MPAIRN.
R The unit starts dialing immediately if only 1
Bluetooth headphone is paired and
connected. Go to step 4.
3
If 2 or more Bluetooth headphones are paired,
MbN: Select the desired headphone. a
MSELECTN
R The unit starts dialing immediately if no
other Bluetooth headphone is connected.
R If the selected headphone is other than the
one already connected, the unit prompts
you to disconnect the Bluetooth connection
with the current headphone. a MYESN
4
When you finish talking, press MOFFN or press
your headphone's button referring to your
headphone's operating instructions.
Note:
R is displayed on the handset.
R While talking on the headphone, you can switch
to the receiver by pressing MTALK/ZN.
*1 Corresponding headphone number is
indicated next to the item.
*1
4/26/2022 3:14:18 PM