Table of Contents
Advertisement
Changing the start and end time
1
MMENUN#237
2
Continue from step 3 "Turning night mode
on/off", page 24.
Call block
This feature allows the unit to reject calls when:
– the unit receives a call from a phone
number stored in the call block list as
unwanted ("Storing unwanted callers",
page 25).
– the unit receives a call without phone
number ("Blocking incoming calls that have
no phone number", page 25).
When a call is received, the unit rings briefly
while caller information is being received. If
the caller's phone number matches an entry in
the call block list, the unit emits no sound to
the caller, and disconnects the call. (Call
Display subscribers only)
*1
This is called first ring. If you do not want
the first ring to sound, turn this setting to
"Off" (page 25).
Important:
R Rejected calls are logged in the caller list.
Storing unwanted callers
You can store up to 30 phone numbers in the
call block list.
Important:
R We recommend storing 10 digits (including
the area code). If only 7 digits are stored, all
numbers that have the same last 7 digits
will be blocked.
n From the caller list:
1
MCN CID
2
MbN: Select the entry to be blocked.
R To edit the number: MMENUN a MbN:
"Edit" a MSELECTN
Press MEDITN repeatedly until the
phone number is shown in the 10-digit
format. And then, press MSAVEN. Go to
step 5.
TG433CSK_(en_en)_0122_ver011.pdf
3
MMENUN
4
MbN: "Save CID" a MSELECTN
5
MbN: "Call block" a MSELECTN
6
MbN: "Yes" a MSELECTN
7
Edit the phone number if necessary (24
digits max.).
8
MSAVEN a MOFFN
n By entering phone numbers:
1
MMENUN#217
2
MMENUN a MbN: "Add" a MSELECTN
3
Enter the phone number (24 digits max.).
R To erase a digit, press MCLEARN.
4
MSAVEN a MOFFN
*1
Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers or out of area
calls.
1
MMENUN#240
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Setting the first ring for the call
block list
If you do not want the first ring from a number
on the call block list to sound, turn the first ring
setting to "Off". The default setting is "On".
1
MMENUN#173
2
MbN: Select the desired setting. a
MSAVEN a MOFFN
Viewing/editing/erasing call
block numbers
1
MMENUN#217
2
MbN: Select the desired entry.
R To exit, press MOFFN.
3
To edit a number:
MEDITN a Edit the phone number. a
MSAVEN a MOFFN
To erase a number:
25
Programming
25
2014/01/22
19:17:40
Advertisement
Table of Contents
